"work was on time, no waste of time, satisfactory installation. Note: professionally handled my misunderstanding of  the date that the work was to be done.
"

"This is a service that no one wants to need, but when you hear water running inside your walls this is the company that  can find the leak accurately. Steve and his partner came out and, using sensitive sound equipment and a special blend of tracer gases injected into the plumbing  system, located the leak under our slab rather than in the wall where we heard it. Steve was able to locate the leak within a foot of where it actually was, and we subsequently had the foundation jackhammered, a hole dug several feet under our foundation, and the leak repaired by a plumber. His system is highly accurate  and we recommend him highly.
"

"

Jonas did a great job fixing a shower pan that had been installed incorrectly. He had to demo all the old tile and level the pan. He then resurfaced the base so that the water would drain properly. He sealed the pan and set the tile. The shower now drains properly and looks great!

I highly recommend Jonas as he is an expert tradesman. If you have a job that needs to be done correctly, and that will last. Give Jonas a call.

Dan O'Hearn

"

"Alvin was careful to explain prior to starting work that if he required extra supplies, etc it would be on top of the Angie's price. Also, that there was the possibility that it would not be a simple replacement. I expected that. The replacement turned out to be more complicated than I'd anticipated.
The plumbing pipes for hose bibbs are installed between the vertical studs. There is supposed to be a horizontal cross brace that secures the "inside" part of the bibb  with 2 screws into the wood. Turns out, when the house was built in 1997, no cross bracing was added inside the wall, so the unsupported pipe had been shifting each time we turned the faucet on or off for the past 17 years. So, when he went to remove the outside portion, instead of "unthreading" as it should have,  the copper pipe broke off at the joint inside the wall. In order to complete the repair, Alvin needed to make an access port on the interior wall. He very carefully sawed an 8x8" piece out of the drywall, added a wood cross brace to the existing framing, secured the plumbing pipe to it, then attached the new hose bibb on the outside. After completing the repair, he carefully re-fitted the piece to the wall and used some caulk I had to cover the seam.
We were charged only for the difference in supplies, not for the additional time involved, which I was grateful for. I was also relieved that we had decided to have this done. I hate to think about some day going out to turn the hose on or off and have a fountain inside the wall.
I felt he handled the situation very well, explaining to me along the way what the problem was and how he would fix it.
"

"It was great. He's a great plumber."

"Quick and easy repair. No parts needed."

"Quality work. Good information and responsiveness from Residential Manager (estimator) Kevin. Installers Joe and Brian are also very professional. Showed up on time and performed the work efficiently and thoroughly."

"When a leak developed on my old water heater,  I had many decisions to make, including whether to try to repair the leak, and if not, what kind of water heater to get to replace my old one, where to install the new heater, and what other plumbing upgrades to do at the same time. (The old heater had been installed in a steel enclosure outdoors, so installing a new heater in the same location was not an option, since the new installation would need to be inspected and the old enclosure would not pass the city's inspection.) I needed to explore my options, understand the pros and cons of each option, and understand how much each option would cost.
I first called a larger, highly-rated plumbing company I had worked with in the past (not KSM). They sent out a plumber who I had not met before, who seemed to quickly become frustrated with my decision-making process. I got the sense that this plumber did not have enough experience to be able to efficiently make recommendations and answer my questions. He asked me to "just decide what you want, then let me know." I decided I wanted a different plumber - someone who can not only do the plumbing work, but also help me decide what plumbing work to do!
Looking through Angie's List for a highly-rated company with experience installing tankless heaters, I found KSM. Kevin (the owner of KSM) answered my call at 7:30am, came out to speak with me that same morning, patiently answered all my questions, and helped me explore all my options. His team inspected all the plumbing in my crawl space and gave me recommendations on future upgrades to consider. KSM's bid on installing a new Navien NPE-240A tankless heater came in lower than the other company's bid; I decided to go with KSM.
Two days later, Kevin's team arrived in the morning to install the new heater. They worked late into the evening to install a gas line and get the new heater up and running; I had hot water again that same evening. They came back on the next business day to tidy up the wall behind the new heater. They also fixed a couple other minor (unrelated) plumbing issues in my house, free of charge. The installation passed the city's inspection on the first try, and our new water heater has been working great for us.
I was very impressed with Kevin's knowledge and experience, and his willingness to patiently give me all the information I needed without giving me a "hard sell". His team was courteous and considerate. They were able to finish the job quickly, they followed through on exactly what they said they would do, and they attended to all my questions and concerns. I will definitely be calling KSM for my future plumbing needs!
"

"When we set out to install a completely different heating and cooling system in our home, we wanted to feel comfortable that the investment we were making was a good one. So we investigated mini-split heat pump technology. Mitsubishi and Fujitsu seem to be the leading producers of these energy-efficient systems. We asked for competitive bids from two sources and awarded the work to Williams Mechanical, LLC of Albuquerque, a family-owned heating, cooling and plumbing business. We're glad we did. From our initial meeting with owner Annette Meier and Comfort Consultant & Install Manager Mike Mollica until our project was completed, we were delighted with the friendly and professional bearing of everyone who worked on the installation. At the same time, we also elected to replace our elderly 50-gallon water heater. It was installed in a single day. As part of the changeover to the mini-split system. Williams removed our two evaporative coolers (which they donate to the needy) and sealed the roof openings. Because our Pueblo style home features several different roof levels, it presented unique challenges for the Williams installers. They dealt with them carefully and professionally. Throughout the process, our questions were answered courteously and patiently, noise and disruption were minimized, and cleanup was done daily. Brett, Alex, Anthony, others — all were great to work with. In short, Williams Mechanical met or exceeded all our expectations. We recommend them highly. David & Beth Wiley"

D&R Services is a full service general contractor with our client's in mind we porvide a quality service with quality of products. Additional address - p.o box 7455 , Albuquerque, NM 87194. Additional email - [email protected].