Get matched with top lighting pros in Suwanee, GA

A motion detector light may need to be reset due to a number of technical issues. These can include faulty or misadjusted sensors and burned-out bulbs. You may also need to reset a motion sensor after an electrical surge or a power outage, as these can change a light’s settings and cause it to function differently.

The easiest and best way to power your outdoor lights is with the use of outdoor outlets. Most building codes now require exterior outlets in homes, so you likely already have outdoor outlets available to plug into. However, you can have these outlets installed if your space doesn’t currently include them.

If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.

If half of a string of Christmas lights is out, it is likely because of a single burned-out, loose, or broken bulb within that section. Long strands of lights often contain more than one circuit, so when one bulb fails, it can cause the entire circuit (or half the strand) to go dark. To fix this, inspect the unlit section and test each bulb to ensure it is tight and functioning properly. Replacing the faulty bulb or repairing a damaged shunt will typically solve the problem.