Top-rated structural engineers.

Get matched with top structural engineers in Lynn, MA

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Lynn, MA?

Select your specific project to find the pro for you.

TRUSTED BY LYNN, MA HOMEOWNERS

  • Average homeowner rating star icon4.4
    Average homeowner rating
  • Verified reviews icon16
    Verified structural engineering services reviews

Find Structural engineers in Lynn

Avatar for AJA Engineering, LLC
AJA Engineering, LLC
5.0(
118
)
Engineer - Structural

Serving Lynn, MA and surrounding areas

Approved

Super Service Award Winner

In business since 2008

Emergency services offered

Small jobs welcome

"Aboud Alzaim was very responsive to all requests. He is obviously an experienced and knowledgeable Structural Engineer. We had full confidence in both Aboud's professional opinion as well as his practical suggestions. We would fully recommend."
Pine Lane, Westwood
Existing Condition
Pine Lane, Westwood
Existing Condition
Exterior Finished Construction

+61

Response time5 hrs
14 neighbors recently requested a quote
Recommended by87%of homeowners
Bob Dennis - Structural Engineer
4.4(
46
)
Engineer - Structural

Serving Lynn, MA and surrounding areas

Approved

In business since 1960

Free estimates

Customers say: Quality work

"Was having a potential home inspected for structural integrity. Spoke to Bob on the phone a few times. Since the home’s basement primarily consisted of a giant crawl space, I was told Don would do the job. Ultimately, the day before the scheduled inspection, I couldn’t get ahold of Don. Bob said Don was “feeling sick,” so the job was off. Frustrating, but a blessing in disguise because we ended up going with Colonial Restorations (the home was built in the 1800s). Colonial Restorations, LLC is the “go-to” for older home inspections and repairs. Tom was amazing (his son Brad is soon to take over the business)! They were both prompt, professional, and thorough. Very pleased with their work and thorough report/estimate. Colonial Restorations, LLC PO Box 868 Fiskdale, MA 01518 508-735-9900"
Install Steel Beam
footing hole
Termite damage
Structural Repair
8 neighbors recently requested a quote
Recommended by94%of homeowners
Taddonio Engineering, LLC
4.8(
346
)
Engineer - Structural

Serving Lynn, MA and surrounding areas

Approved

Super Service Award Winner

In business since 2016

Small jobs welcome

Credit card accepted

"Adam was wonderful. He was punctual, articulate, very knowledgeable, along with a pleasant personality! He gave us a structural report for the insurance company within 24 hours! Lastly, His price was very reasonable. I highly recommend that you hire Adam for structural engineering assessment."
Response time1 day
Response rate86%
328 neighbors recently requested a quote
Avatar for Veitas and Veitas Engineers
Veitas and Veitas Engineers
4.9(
8
)
Engineer - StructuralDraftsperson/CADD

Serving Lynn, MA and surrounding areas

Approved

In business since 2004

Free estimates

Credit card accepted

"After an unusual situation arose at my home, I was concerned about the possibility of structural damage caused by drilling and new construction at an adjacent lot. After receiving a recommendation for Veitas Engineers from a trusted source, I called and scheduled an appointment. I am so thankful that I did. I continue to be impressed with the amount of time that the two engineers spent at my house, closely inspecting the exterior and interior. Within days, I received a 16-page detailed report which included drawings, photographs, recommendations, and action items. I was so pleased when I saw that the action items were categorized as structural and non-structural, that is, that the engineers included items beyond my actual structural concerns. I used the report when working with a contractor to follow up on the recommendations and action items. The contractor was impressed with the quality, clarity, and scope of the report. I am so happy that I chose Veitas Engineers!"
South Shore Barn Reno
South Shore Barn Reno
South Shore Barn Reno
South Shore Barn Reno
South Shore Barn Reno

+5

Response time6 hrs
Response rate100%
14 neighbors recently requested a quote
Avatar for M. Kinne Designs, LLC
M. Kinne Designs, LLC
5.0(
26
)
Draftsperson/CADD

Serving Lynn, MA and surrounding areas

Approved

Super Service Award Winner

In business since 2021

Free estimates

Small jobs welcome

"We worked with Mike to design a 3 -D model of a Bar/ Resturant that we are renovating . He worked with us and did everything we needed him to do and we were very pleased with the results. I would recommend him to anyone."
Pavilion with Retaining Wall
Measurements
Realistic vs. Concept
Lighting Concept
Ground Level

+12

Response time11 hrs
Response rate95%
16 neighbors recently requested a quote
Avatar for d. a. kinsella Co
d. a. kinsella Co
4.5(
12
)
ArchitectArchitect - For BusinessDraftsperson/CADD

Serving Lynn, MA and surrounding areas

Approved

In business since 1990

Free estimates

Emergency services offered

"Contacted them in march, they were quick to get back to me to see the job and make a proposal. I wanted steel rather than the more common laminated wood beam, they were happy to accomodate this. I had to clear all my stuff out of the basement so that they could work, this delayed my acceptance of the contract until I finished . When they began it took about a 2 weeks to complete. They first put up 2 tempoary support walls, removed the basement staircase and put it off to one side, then poured the footings for the post.When the concrete was ready it took 1 day to lift in the beam and put the post under it. A great improvement over what was there when i bought the house.


October 2015, I am still pleased with the steel beam."
This is new Pacific Northwest Modern style home in Burlington, MA. The home was designed to the clients specification of style and accommodations. It is 3000sf and contains open concept living, media room, 1 guest bedroom with ensuite, 2 childrens bedrooms with ensuite and a master suite; and a 3 car garage. The home was sited where a previous cape style home which could not be expanded to the clients expectations due to limitation by the zoning, so the house was reveresed to over look the nice
Open concept living room facing the garden and pool. Balcony overlooking the family room
Double island feature is shown for both preperation, serving buffet style and entertaining while meals are prepared.
Masters Bedroom with artisian created head board.
Guset Bathroom featuring a wood accent wall reminiscient of Mid Century Modern period

+13

Response time4 days
Response rate100%
3 neighbors recently requested a quote
JFA Design Group
4.2(
19
)
ArchitectDraftsperson/CADD

Serving Lynn, MA and surrounding areas

Approved

In business since 2000

Free estimates

Small jobs welcome

"I found Johnâ s service through a contractor that I didnâ t end up working with. But working with John was a nice experience. I have plans to do some reno work on my townhouse kitchen, and an important part of the job is to widen the entrance between the kitchen and the dining room. Because itâ s a townhouse structure and the management donâ t know where the original blueprint is, and they require an architectural evaluation and drawing for opening the walls. I had to hire a structural engineer/architect to do the job. John came to my house several times. He did not open the wall to probe. He looked at the structures from the basement to the kitchen and did his engineer calculation and gave me the architectural drawings according to how big I wanted to widen the entrance. I donâ t know anything about architect, but his drawing was sent to the City Hall for permit. I did change my thoughts on the all opening a couple of times, and he always responded promptly and kindly, and made changes accordingly. I had expected a much higher price from contractors for hiring an architect, but John was very reasonable, and said for a small adjustment, it wouldnâ t cost so much. I thought everything went well in our communication and the final product and the value of the work. One thing though, when the city building inspector came, he said where we wanted the wall to end was not sitting on a basement column, and that piece of end wall has to be on a column. So this means I had to put back 6 inches of the wall I had originally cut. I was a little bummed about that. I canâ t say if this is something the architect shouldâ ve known (or maybe building code is slightly different every city?), but I wish I could be better prepared or informed about this particular building code. Overall, I thought it was a good experience and I would recommend JFA Design Group."
Response time2 days
Response rate88%
2 neighbors recently requested a quote
...
Showing 1-10 of 121
Structural Engineering questions, answered by experts

In framing, studs are placed at 16-inch intervals to coincide with the typical spacing of wall materials such as drywall or plywood. This spacing is called "on-center" and is necessary for maintaining structural stability and efficient use of materials. The 16-inch spacing also helps to distribute the weight evenly across the building's structure. For those looking to cut material costs and improve energy efficiency, 24-inch stud spacing can be employed through a method called "advanced framing". This requires careful planning and adherence to local building codes to ensure structural integrity.

Structural engineers specialize in all aspects of a building’s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding who to hire for foundation repair.

Yes, all states require structural engineers to carry the proper license, with specifics determined by each state. You can use Angi’s state licensing tool to confirm that the structural engineer you’re considering holds the required licensing to tackle your job. Hiring an unlicensed structural engineer will not only cause issues with permits but it could also lead to an unsafe building. The cost of a professional, licensed, and experienced engineer is well worth the investment.

Yes, walls on the top floor can be load-bearing if stacked on the floor’s foundation.

The process involves initial consultation, concept development, detailed planning, regulatory approvals, and integration of contractor work for project execution.

The Lynn, MA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.