Top-rated insulation pros.

Best insulation pros near Sunman, IN

Enter your zip and get matched with up to 5 pros

Need a pro for your insulation service project in Sunman, IN?

Select your specific project to find the pro for you.

Top-Rated Insulation pros in Sunman - Updated Nov 2026

Avatar for Tri State Complete Home Repair and Maintenance
Tri State Complete Home Repair and Maintenance
4.5(
79
)
Batt, Rolled or Reflective Insulation - Install or Upgrade

Serving Sunman, IN and surrounding areas

Approved

Super Service Award Winner

In business since 1996

Free estimates

Emergency services offered

"If you’re deciding between contractors, stop what you’re doing and hire TriState Complete Home and Repair. It’s a no brainer. Tim and his team bring level of experience and car far above those that’s we’ve worked with trying to remediate our home that was subjected to a fire. Even before hiring, Tim saved us over $20k by giving simple advise. We’ve so far worked with them to repair our ceiling and attic framing. They continued to save by being create and flexible. More importantly, their quality of work and care speaks for itself. This is the first of many repairs they have lined up for us so stay turned as we will report back. You won’t be disappointed working with Tim and his team."
Remodeling - General Project
Before ☹️
Remodeling - General Project
After! !
Additional Photos

+5

10 neighbors recently requested a quote
Recommended by50%of homeowners
Avatar for Guardian Spray Foam Insulation
Guardian Spray Foam Insulation
4.6(
15
)
Spray Foam Insulation - Install

Serving Sunman, IN and surrounding areas

In business since 2000

Free estimates

Offers commercial services

"Outstanding service from start to finish. The team at Guardian Spray Foam went above and beyond to insulate our home efficiently and effectively. The attention to detail from them and their professionalism was remarkable. I would highly recommend them to anyone looking for a quality insulation job."
open cell
open cell
open cell
open cell
open cell

+21

Response time40 mins
Response rate100%
Recommended by86%of homeowners
Avatar for American Basement Solutions
American Basement Solutions
4.3(
46
)
Batt, Rolled or Reflective Insulation - Install or UpgradeBlown-In Insulation - Install or UpgradeInjection Insulation - Install+2 more

Serving Sunman, IN and surrounding areas

In business since 1992

Credit card accepted

"It was a small job. They sealed the vents to the crawlspace, then, since there was already solid insulation panels on the walls, put a vapor/moisture barrier, in the form of a tarp, 4 feet wide and as long needed, completely around the crawlspace. It was then sealed to the walls with "nails" and adhesive. This seals the wood frame of the house from the 'Outside", the ground, which is the floor of the crawlspace. A 20 mil thick, quite heavy, "floor" was installed, also in the form of a tarp, It went up the walls about 3 feet and was taped to the 'tarp" on the walls, using a tape made for this application. The piers were wrapped with the same stuff and taped to seal the inside from the outside. the "floor" is also a vapor/moisture barrier, but, heavy enough to walk on if needed. This basically makes the crawlspace another room, rather than the outside. Our house is one year old and was already getting mold on the floor joists. Since the air in the crawlspace will now be heated in the winter and cooled in the summer, just like the rest of the house, the mold and cold (52 degrees) floors we experienced last winter will hopefully be eliminated. We shall see when dumb winter gets here."
Additional Photos
Additional Photos
Additional Photos
Recommended by85%of homeowners
Showing 1-10 of 28
Insulation FAQs, answered by experts

You don’t need to staple insulation, as your drywall and studs will hold it into place. But if you already have a staple gun and staples lying around, it can help keep the product in place and avoid any shifting. But, most experts agree it’s an unnecessary step.

If you’re adding a vapor barrier, you will need to staple that in place.

Insulation is professionally installed by measuring spaces, cutting materials to fit correctly, and placing them without gaps for optimal thermal resistance.

In nearly all cases, you are required to install a vapor barrier in your crawl space. However, local regulations will change based on the local climate and the crawl space's susceptibility to moisture. Even if a vapor barrier is not legally required, it is often a good idea to keep your crawl space dry.

For a DIY solution to protect an outdoor faucet from freezing, you can craft a cover using spare rags, a durable plastic bag, and duct tape. However, be aware that this method may not be as effective as a store-bought cover. Fabric like rags or old towels can absorb water, which could freeze and cause problems. While a DIY cover can work as a temporary stopgap, a proper outdoor faucet cover is inexpensive (often $5 or less), easy to install, and readily available, making it the recommended long-term solution.

Installing sheets of plywood over attic insulation is a popular choice, especially in storage spaces. That said, insulation works by trapping hot air—so it needs extra space to expand and be effective, or you might reduce the energy efficiency of your home. 

It’s important that you never compress the insulation by installing flooring directly on top of it. In many houses, you’ll need to install a subfloor before putting plywood over insulation in your attic.

The Sunman, IN homeowners’ guide to insulation services

From average costs to expert advice, get all the answers you need to get your job done.