Get matched with top roofers in College Corner, OH

Hail damage is bad for a roof because it can leave the roof vulnerable to the elements. Hail may leave more than dents or scratches behind. It can actually cause the shingles to crack, which means water can leak into your home from the roof. Hail can also wear down the granules on the shingles. Without these granules, the shingles are weaker and more vulnerable to the elements, particularly wind. If the hailstorm is accompanied by high winds, it may take your shingles with it.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

The cost to replace a roof typically ranges from $8,700 to $22,000, with a national average of around $9,200. The total cost depends on the size of your roof and whether you need a full replacement or can simply place new shingles over the old ones. A full replacement, which is necessary if the roof is several decades old or has multiple layers, is more expensive. This process involves tearing off the old roofing materials, inspecting and repairing the underlying structure, and then installing the new roof.

In most cases and locations, roofs with a single layer of asphalt roofing shingles won't require roof removal before installing a metal roof. However, underlayment may be necessary on roofs with moderate shingle damage. Heavily damaged roofs or ones with multiple shingle layers will most likely require removal before a metal roof can go on.