Get matched with top roofers in Metamora, IN

A roof's ability to handle snow depends on its strength and the snow's weight, as wet snow is much heavier than dry, fluffy snow. While designs in snowy regions often allow for 35 to 50 pounds per square foot, a general guideline is that a typical roof can withstand about four feet of fresh snow, two feet of packed snow, or just one inch of ice. Factors like the roof's age, slope, and support structure also affect its capacity; newer, sloped roofs generally hold more weight than older, flat ones. Ice and ice dams add significant, dangerous weight. Because capacity varies, it is best to contact a professional roofing contractor or the original builder to determine the maximum snow load for your specific home.

A new roof may improve insulation and ventilation problems that can lead to ice dams, but it’s not a solution for preventing them. All roofs are susceptible to the conditions that cause ice dams, so it’s best to invest your money into insulation and gutter management solutions rather than a new roof if you don’t need a replacement yet.

Re-roofing is the process of placing a layer of shingles over top of existing shingles, rather than pulling out those shingles and replacing them. Compared to a full roof replacement, re-roofing typically costs less and requires less labor and time. It's not an option for everyone, though. You may need a full roof replacement if your roof already has more than one layer of shingles. A full replacement may also be necessary if your roof has extensive damage.

Yes, it’s possible to replace drip edge flashing without removing shingles, but it’s not a good idea. You’ll have to lift the bottom shingles up to remove the old drip edge, install the new material, and then lay the lifted roofing material over the new drip edge. Bending roof shingles can cause damage, and if you have ongoing issues with roof leaks that prompt drip edge replacement, it’s a good idea to consider a roof and drip edge replacement to avoid ongoing issues.