Get matched with top fire pit installation pros in Independence, MO

Wiring a light switch wrong can cause a fire if the incorrect wiring causes arcing, meaning the current jumps uncontrolled from one conductor to another. Loose wires or worn wires that are not repaired or replaced can cause arcing. If you’re not 100% sure you can do the job safely, don’t attempt to wire a light switch on your own.

You should never block both the top and bottom of your chimney. Proper airflow is essential because the temperature inside the chimney will still fluctuate as your house warms and cools. Moisture can build up without ventilation, leading to dampness in your walls over time. Blocking the top prevents debris and animals from entering, but the chimney still needs air circulation to avoid condensation issues. Allowing the chimney to breathe maintains the health of your home and prevents long-term damage.

You might be able to turn a normal door into a fire-rated door, but you’re better off purchasing one that meets all NFPA 80 standards. If you want to DIY a normal door into a fire door, you’ll need a self-adhesive intumescent seal, metal hinges, fire-resistant glazing, and a self-closing device, but you’re always better off buying a certified fire door.

Ensure you have a safe environment for them to work on, and there aren’t items such as logs, build-up of yard materials, missing or damaged shingles, and weak areas on the roof. Communicate any known electrical issues with contractors at the beginning of the project, and consider hiring an electrician to fix those. Finally, if you are attempting the project yourself, do so when there isn’t any rain, and you can safely get your footing on the roof using proper equipment, such as an extension ladder. Don’t attempt this alone, and have a helper nearby to assist.