Get matched with top drain pipe installers in Wakefield, MA

"I went to turn on our heating system and it wouldn't turn on. I also noticed there was water dripping from a heater pipe. I called Platinum and Robert responded to my call within the half hour. We scheduled a time for him to come the next day and he was able to fix the heater quickly. As our system is pretty old, he also took the time to discuss options for potentially replacing it and also showing me different parts on the system that might need to be replaced if we didn't want a new system. He also looked at another plumbing project I was thinking about while he was there. About 15 minutes after he left, I realized I had forgotten to mentioned the dripping pipe. I called him to ask if I should be concerned. He immediately turned around, came and assessed the problem, and fixed it with no additional cost. I would highly recommend and plan on using Platinum for any future plumbing needs."

"I contacted this morning and they arrived with my new water heater around 2pm and finished installing and cleaning up by 3:30pm. Job well done. Worked efficiently and clean"

"As part of a second floor renovation, I needed some new baseboard heaters installed in two bedroom, a pipe connecting them relocated/replaced, and some leaky valves replaced on my boiler. Milltown was one of the only plumbing companies that actually returned my calls, and they were able to come out right away, which was great because it was almost October and was starting to get cold. They did an excellent job with all of the work, and I think the price was reasonable for what they did. They were punctual, clean, and professional. No complaints."

"Absolutely wonderful. This is my first home and my first major project. Jeff and Jeremy were nothing but professional, prompt and informative about everything they were doing. Made me really excited for what to do next! Their attention to detail is phenomenal, they even structured the intake and exhaust pipes in a way where the snow wouldn't hinder the airflow. If you're not calling them for all of your plumbing and heating needs, you need to start now."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"very professional, punctual, and thorough installed an internal french drain system including demolition work and sump pump and backup sump pump with dehumidifier. Bulk of work done within 2 days, balance of work to be down when weather warms up and ground is soft enough to place drain outlet pipe and down spout extensions underground"

LEAL CLEANING AND RESTORATION SERVICES INC Just call 978-778-6676 , We are Specializes in Water Damage Services and Cleanup & Restoration of Residential & Commercial properties after disaster Lime Flood Damage , Sewer Backup Fire Damage , Smoke Odor Removal, or Any Water Damage Situation. Leal Cleaning and Restoration Services Inc Ready for you Open 24Hours , Just call 978-778-6676 , also We do mold Removal & mildew Removal from your home or business. Our staff & crews are highly trained in property damage restoration. From initial & ongoing training at our corporate training facility to regular industry certification, you can be assured our staff are equipped with the knowledge they need to restore your property. With advanced "real-world" training facilities you know you are in good hands with , Quality working if you need help call us 978-778-66\n

"I was really happy with the guys they made it very easy and done an excellent job. We had multiple leaks in our basement and they repaired the foundation and waterproofed it for us. Thanks again would highly recommend !!"

"They advice, and had all our questions answered on sensible and affordable options. Very knowledgeable, prompt, polite, efficient, and thorough team! We are happy with their waterproofing services in our basement (fast sump pump and a grate trench with a discharge line that goes 15 feet to the outside bubbler) as well as crawl space shield installed under our addition. It works well, and Pioneer checked a month later and a year after for inspection and cleaning. A+ work and workers."

"I recently had a brand new HVAC system installed for both heating and cooling, and I couldn’t be happier with the experience. The team at Comfort Professor was extremely professional from start to finish. They worked efficiently, paid attention to every detail, and left everything spotless when the job was done. The cleanup was perfect, which I really appreciated. Highly recommend them if you’re looking for quality work and a smooth, hassle-free installation!"