Best septic tank pros near Fox Crossing, WI

Most well pump pressure switches have a factory setting of 30 to 50 PSI. There’s some flexibility with this if you’d like a lower or higher water pressure, but remember that it should sit 2 to 3 PSI above your well tank’s general pressure setting.

The inside of your pressure switch cover will usually indicate minimum and maximum settings—going below and above the numbers might damage your well pump.

The physical constraints of hand-drilling a well limit the depth you can achieve. Manually digging with picks and shovels may only lead to shallow wells of up to 60 feet in depth. To reach greater depths, you need more specialized equipment. The diameter of your well and the tools you’re using will determine how far down you can dig.

Your septic tank naturally contains the beneficial bacteria it needs to function, so you typically don't need to add more. However, if you wish to replenish the bacteria, you can use natural methods. For example, you can add three overripe tomatoes to your garbage disposal or flush 1/4 ounce of active yeast down the toilet every three months. While store-bought septic enzymes and chemicals are available, many experts consider them unnecessary and potentially harmful. The most effective way to maintain a healthy bacteria population is to avoid using chemical drain cleaners, which can kill the good bacteria in your system.

Yes, it is generally okay to oversize a well pressure tank, and it will not harm your well system. The primary advantage is that a larger tank reduces frequent pump cycling, leading to longer, slower cycles with fewer startups. This can result in less wear and tear, potentially increasing the lifespan of the pump and conserving energy. However, there are drawbacks to consider. Oversized tanks have a higher upfront cost and require more physical space. While not necessarily a bad thing, opting for a tank that is appropriately sized for your well is often the most efficient choice in terms of cost and space.