Top-rated welders.

Get matched with top welders in Shoreline, WA

Enter your zip and get matched with up to 5 pros

Need a pro for your welding project in Shoreline, WA?

Select your specific project to find the pro for you.

TRUSTED BY SHORELINE, WA HOMEOWNERS

  • Average homeowner rating star icon4.3
    Average homeowner rating
  • Verified reviews icon26
    Verified welding services reviews

Find Welders in Shoreline

Avatar for JETGEN METAL-WORX LLC

JETGEN METAL-WORX LLC

5.00(
19
)
Approved Pro

JETGEN METAL-WORX LLC

5.00(
19
)
Approved Pro
Customers say: Quality work
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers
2 years of experience

We are here to meet all your custom metal project needs! everything from custom security gates to fire escape route repairs down to restoration metal working. we offer free over the phone estimates as well as we can schedule an on-site job scope "service fee may apply depending on distance" all on-site job analysis fee get put towards final project. Family owned and operated!

"We were recommended JetJen as the "Top of the List" by a welding supplier in Bremerton for our unique need. Prior to our annual trip to TX, during my prior to departure inspection I observer a suspension hanger had tore away from the main I-beam. I went through 3 local RV Dealers who all turned down the repairs. JetJen was the only one who not only accepted the work, he took it as a challenge. For a whole week after his 10-12hr "day job", they worked tirelessly for hours each night until the repair was better than off the assembly line. We are now in TX without any problems. I would not hesitate to reach out to them in the future. Jetty & Geneva are like family now! "

Chris S on December 2025

We are here to meet all your custom metal project needs! everything from custom security gates to fire escape route repairs down to restoration metal working. we offer free over the phone estimates as well as we can schedule an on-site job scope "service fee may apply depending on distance" all on-site job analysis fee get put towards final project. Family owned and operated!

"We were recommended JetJen as the "Top of the List" by a welding supplier in Bremerton for our unique need. Prior to our annual trip to TX, during my prior to departure inspection I observer a suspension hanger had tore away from the main I-beam. I went through 3 local RV Dealers who all turned down the repairs. JetJen was the only one who not only accepted the work, he took it as a challenge. For a whole week after his 10-12hr "day job", they worked tirelessly for hours each night until the repair was better than off the assembly line. We are now in TX without any problems. I would not hesitate to reach out to them in the future. Jetty & Geneva are like family now! "

Chris S on December 2025


Avatar for LVL Construction, LLC

LVL Construction, LLC

4.95(
11
)
Approved Pro

LVL Construction, LLC

4.95(
11
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
23 years of experience

We have a lot of experience in so many different areas that we are able to avoid obstacles, solve problems, and deliver the correct results every time. We have been building decks, fences, outdoor structures etc. in the Seattle area for over 20 years and we know how to deal with the complex rain and sun patterns that impact the lifespan of any project. Recently, there has been an explosion of repair and construction work and A LOT of new people out there claiming to be skilled contractors. There is a huge difference between simply claiming you CAN build a deck and KNOWING how to properly build a deck to last in our climate. This is our best asset. We know how to bid and fulfill projects and we know all the important corners that simply cannot get cut. We always offer honest and direct advice on costs and source of materials and work hard to get you the most for your budget. Please consider contacting us directly as we are happy to help!

"Very fast and informative communication. Excellent time management and prompt attention to questions. Beautiful results."

Robert S on March 2020

We have a lot of experience in so many different areas that we are able to avoid obstacles, solve problems, and deliver the correct results every time. We have been building decks, fences, outdoor structures etc. in the Seattle area for over 20 years and we know how to deal with the complex rain and sun patterns that impact the lifespan of any project. Recently, there has been an explosion of repair and construction work and A LOT of new people out there claiming to be skilled contractors. There is a huge difference between simply claiming you CAN build a deck and KNOWING how to properly build a deck to last in our climate. This is our best asset. We know how to bid and fulfill projects and we know all the important corners that simply cannot get cut. We always offer honest and direct advice on costs and source of materials and work hard to get you the most for your budget. Please consider contacting us directly as we are happy to help!

"Very fast and informative communication. Excellent time management and prompt attention to questions. Beautiful results."

Robert S on March 2020


Avatar for Iron Earth Construction LLC

Iron Earth Construction LLC

5.00(
3
)
Approved Pro

Iron Earth Construction LLC

5.00(
3
)
Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
4 years of experience

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our

"Very accommodating and great service and product"

sally k on September 2023

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our

"Very accommodating and great service and product"

sally k on September 2023


Avatar for Stacks Welding LLC

Stacks Welding LLC

5.00(
2
)
Approved Pro

Stacks Welding LLC

5.00(
2
)
Approved Pro
15 years of experience
Free onsite estimate

Stacks Welding LLC has built an excellent reputation for customer satisfaction by providing quick estimates, great attention to detail, and competitive pricing. We service both residential and commercial properties. We give you the peace of mind you need to give your home the attention it deserves. Call us today and let's get started!

"Great work! Fixed my issue very quick and was on my way. Definitely recommend! Thankful for mobile welding!"

Jay S on September 2025

Stacks Welding LLC has built an excellent reputation for customer satisfaction by providing quick estimates, great attention to detail, and competitive pricing. We service both residential and commercial properties. We give you the peace of mind you need to give your home the attention it deserves. Call us today and let's get started!

"Great work! Fixed my issue very quick and was on my way. Definitely recommend! Thankful for mobile welding!"

Jay S on September 2025


Holman’s Body & Fender Shop

4.92(
80
)

Holman’s Body & Fender Shop

4.92(
80
)
Customers say: Quality work
Recommended by 96% of Angi customers
Recommended by 96% of HomeAdvisor customers

Local family owned & operated. 8 employees. Additional contact name - Donald E Holman. Award winning. Additional email - [email protected]. Additional DBA - Holman's Body & Fender Inc.

"They were courteous, professional, came in under insurance estimate, and did great work! All certified techs and use all quality parts."

Lewis L on June 2018

Local family owned & operated. 8 employees. Additional contact name - Donald E Holman. Award winning. Additional email - [email protected]. Additional DBA - Holman's Body & Fender Inc.

"They were courteous, professional, came in under insurance estimate, and did great work! All certified techs and use all quality parts."

Lewis L on June 2018


Avatar for Reidt Way Doors, LLC.

Reidt Way Doors, LLC.

5.00(
39
)

Reidt Way Doors, LLC.

5.00(
39
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

REIDT WAY DOORS, LLC is fully Licensed, Bonded & Insured. We are your local garage door company, fair prices, great service, and we're known in the valley since 1990. CALL NOW 425-503-7353 Ask for Richard! Additional contact: 425-888-4566 ask for Bambi Additional email: [email protected]

"Definitely recommend/hire. I first called Reidt Way Doors in the morning and explained my wood garage door (original that is 30+ years old) had come apart and needed replacing. Richard said he could come by for a look later that afternoon. He was the only door company I called that didn't schedule for next day, week, or beyond. Richard showed up around 5pm and had a look at the door. He said that these doors were well made and I could likely fix the top panel, vs buying a whole new door, as the wood had separated but not fractured. After talking through his recommendation (what exactly to undo to remove the panel) I was impressed and going to go that route. Next thing I know he's poking and prodding on the door and he gets the panel pieces to go back into place on the spot. He attaches a steel brace in two areas to hold the top/bottom together, and the door I thought was going to cost me at least a $grand, is now in perfect working order! He also replaced the springs, as one had broken, which caused the issue to begin with."

Bruce S on April 2018

REIDT WAY DOORS, LLC is fully Licensed, Bonded & Insured. We are your local garage door company, fair prices, great service, and we're known in the valley since 1990. CALL NOW 425-503-7353 Ask for Richard! Additional contact: 425-888-4566 ask for Bambi Additional email: [email protected]

"Definitely recommend/hire. I first called Reidt Way Doors in the morning and explained my wood garage door (original that is 30+ years old) had come apart and needed replacing. Richard said he could come by for a look later that afternoon. He was the only door company I called that didn't schedule for next day, week, or beyond. Richard showed up around 5pm and had a look at the door. He said that these doors were well made and I could likely fix the top panel, vs buying a whole new door, as the wood had separated but not fractured. After talking through his recommendation (what exactly to undo to remove the panel) I was impressed and going to go that route. Next thing I know he's poking and prodding on the door and he gets the panel pieces to go back into place on the spot. He attaches a steel brace in two areas to hold the top/bottom together, and the door I thought was going to cost me at least a $grand, is now in perfect working order! He also replaced the springs, as one had broken, which caused the issue to begin with."

Bruce S on April 2018


Maximum Performance Inc

4.96(
27
)

Maximum Performance Inc

4.96(
27
)
Customers say: True professional
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Full service auto repair.Engine Repair – Replacement – Rebuilding, Engine Performance Diagnostics, Emission Systems Diagnosis & Repair, Tune Ups, Head Gasket Replacement, Timing Belt & Serpentine Belt Replacement, Complete Brake Service including anti-lock system diagnosis & repairs, CV axle replacement & driveline repairs, Clutch replacement including Fly Wheel Grinding, Transmission Service, repairs and replacement, Differential Repair / Rebuilding / Modifications, 4 Wheel Drive Component Service & Repair, Cooling system Flushing / Radiator & Water Pump Replacement, Exhaust System & Catalytic Converter Replacement, Heating & Air Conditioning Service and Repair, Starter, Alternator & Electrical systems, Diagnostic & Repair, Steering / Suspension / Wheel Alignment, Fuel Injection Service including Motor Vac cleaning system, Carburetor Rebuilding, Lube / Oil / Filter Service including Amsoil Synthetic fluid, Pre-purchase vehicle inspections, Brake Drum & Rotor Machining, Light duty diesel truck service & repair, We also perform Tig & Mig Welding & Repairs on Steel and Aluminum

Full service auto repair.Engine Repair – Replacement – Rebuilding, Engine Performance Diagnostics, Emission Systems Diagnosis & Repair, Tune Ups, Head Gasket Replacement, Timing Belt & Serpentine Belt Replacement, Complete Brake Service including anti-lock system diagnosis & repairs, CV axle replacement & driveline repairs, Clutch replacement including Fly Wheel Grinding, Transmission Service, repairs and replacement, Differential Repair / Rebuilding / Modifications, 4 Wheel Drive Component Service & Repair, Cooling system Flushing / Radiator & Water Pump Replacement, Exhaust System & Catalytic Converter Replacement, Heating & Air Conditioning Service and Repair, Starter, Alternator & Electrical systems, Diagnostic & Repair, Steering / Suspension / Wheel Alignment, Fuel Injection Service including Motor Vac cleaning system, Carburetor Rebuilding, Lube / Oil / Filter Service including Amsoil Synthetic fluid, Pre-purchase vehicle inspections, Brake Drum & Rotor Machining, Light duty diesel truck service & repair, We also perform Tig & Mig Welding & Repairs on Steel and Aluminum


Avatar for Apollo Plumbing

Apollo Plumbing

4.72(
535
)

Apollo Plumbing

4.72(
535
)
Customers say: Quick response
Recommended by 90% of Angi customers
Recommended by 90% of HomeAdvisor customers

24/7 Emergency Service Available! Call 425-387-1507. Apollo Plumbing is a locally owned and operated family business. We have proudly served the area with professional plumbing and drain cleaning services since 2005. We provide all our customers with personal, quality service that you won’t find at other plumbing companies. All of the work that we do in your house is carried out with the expertise of a licensed plumber so that you can feel confident about the service we provide. Apollo Plumbing is licensed, insured, and bonded. We are so confident that you’ll be pleased with our services that we back all of our work with a written guarantee.

"I hired this company to check an error code on my water heater. They informed that the anode rod needed to be replaced or I could just replace the entire water heater. They gave me several quotes including $4800 to replace just the anode rod or $4500 to replace the whole water heating unit, but wouldn't show me pricing details. I told them to move forward with the repair and afterwards he could walk me through the details of the pricing. They charged my card for $4127 plus tax. I asked to see an itemized invoice and was told I would be sent one when the technician completed his notes. I later received a one line item invoice for $4127 plus tax for a 50 gal electric water heater replacement, several photos, and nothing more. I looked up the retail cost of my new water heater and it is only $825. The average cost in my area is $1000-$2300 for installing a replacement water heater of its size and kind. This company will overcharge you. I?ve filed with the AG for price gouging. "

Joshua W on October 2025

24/7 Emergency Service Available! Call 425-387-1507. Apollo Plumbing is a locally owned and operated family business. We have proudly served the area with professional plumbing and drain cleaning services since 2005. We provide all our customers with personal, quality service that you won’t find at other plumbing companies. All of the work that we do in your house is carried out with the expertise of a licensed plumber so that you can feel confident about the service we provide. Apollo Plumbing is licensed, insured, and bonded. We are so confident that you’ll be pleased with our services that we back all of our work with a written guarantee.

"I hired this company to check an error code on my water heater. They informed that the anode rod needed to be replaced or I could just replace the entire water heater. They gave me several quotes including $4800 to replace just the anode rod or $4500 to replace the whole water heating unit, but wouldn't show me pricing details. I told them to move forward with the repair and afterwards he could walk me through the details of the pricing. They charged my card for $4127 plus tax. I asked to see an itemized invoice and was told I would be sent one when the technician completed his notes. I later received a one line item invoice for $4127 plus tax for a 50 gal electric water heater replacement, several photos, and nothing more. I looked up the retail cost of my new water heater and it is only $825. The average cost in my area is $1000-$2300 for installing a replacement water heater of its size and kind. This company will overcharge you. I?ve filed with the AG for price gouging. "

Joshua W on October 2025


Avatar for Method Finish Carpentry LLC

Method Finish Carpentry LLC

5.00(
68
)

Method Finish Carpentry LLC

5.00(
68
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

When I started my company over 10 years ago, there were three things that I vowed to provide to my customers: quality, integrity, and style. I have been working in the Seattle area with over 20 years of experience. I take pride in my work and I believe that it is an extension of myself. I enjoy finding creative solutions and building things to last in the Pacific Northwest.

When I started my company over 10 years ago, there were three things that I vowed to provide to my customers: quality, integrity, and style. I have been working in the Seattle area with over 20 years of experience. I take pride in my work and I believe that it is an extension of myself. I enjoy finding creative solutions and building things to last in the Pacific Northwest.


"Fantastic - Scott Taylor agreed to rebuild our large, old deck even though it was at our cabin out in the mountains. He then had many good ideas about how to redesign the original deck in ways that were more efficient and also looked better. He was very communicative and explained everything as we went along. He and his team worked day and night, even in the pouring rain and during the challenging time of the COVID-19 pandemic. I would definitely hire him again, he is so professional and also very personable."

Nancy P on February 2021

Family owned and operated small business. Email is [email protected]

"Fantastic - Scott Taylor agreed to rebuild our large, old deck even though it was at our cabin out in the mountains. He then had many good ideas about how to redesign the original deck in ways that were more efficient and also looked better. He was very communicative and explained everything as we went along. He and his team worked day and night, even in the pouring rain and during the challenging time of the COVID-19 pandemic. I would definitely hire him again, he is so professional and also very personable."

Nancy P on February 2021

...
Showing 1-10 of 138
Welding questions, answered by experts

Most projects take 1-4 weeks, depending on material sourcing, design intricacy, and required finishing treatments like powder coating or galvanization.

Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.

Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.

Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.

Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

The Shoreline, WA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

  • A woman welder working

    Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"