Get matched with top paving pros in Convoy, OH

If you’re installing pavers over an existing concrete slab, you don’t need to affix the majority of the pavers, but you should use a polyurethane-based adhesive on the border pavers. Polyurethane will expand and contract with temperature changes, which will help keep the pavers firmly in place throughout the year. It’s also strong enough to stand up to foot traffic. You’ll use polymeric sand between the non-border pavers to keep them in place and prevent shifting.

It takes recycled asphalt 48 hours to initially harden and up to 3 months to fully cure. It’s best to stay off of recycled asphalt for at least 48 hours, then you can walk or drive standard vehicles on it. Hold off on driving heavy trucks or equipment on it for at least 7 days. Allowing the surface to melt together and harden ensures that the surface stays durable and long-lasting. 

The stones do not work well on uneven ground. If the stones are not buried into the ground and made level upon installation, they almost certainly will shift or crack on uneven ground. Additionally, rainwater or water from sprinklers can run under the edge of an uneven paver, causing erosion. In a freeze and thaw cycle, trapped water under the paver can cause the problem to worsen by shifting the stepping stones around. Use a bubble level to make sure the ground under each paver is as even as possible, even if the nearby ground is uneven.

The best steep driveway material is permeable pavers filled with gravel or crushed stones. Plastic, rubber, and concrete pavers all work to allow water to run down your driveway without washing away and eroding your driveway. These paver materials also do well with ice and snow, unlike brick or concrete pavers. You can also install a driveway retaining wall to help prevent pavers and gravel from shifting over time.