"Grove Heating & Cooling came to the rescue 5/17 after another local company couldn't complete the job. We needed our heat pump/compressor moved for the installation of a patio then reconnected. The "other" company disconnected then couldn't schedule to finish even after giving them a months notice ahead of time. We found Grove and gave them a call. It was after hours and the on-call tech returned the call. He wasn't able to come out that night but made sure to call to schedule the very next morning. By noon we had service to reconnect the heat pump and 3 hours later we were up and running. Everyone at Grove were so responsive and went out of their way to make sure we felt like a priority. You can really tell why they have been in business as long as they have been with how well they treat their customers on top of being technically proficient. Our family is now a super fan and advocate for Grove. Highly Recommended! Mike"
"Sam and Chad did a wonderful job clearing the tub drain, installing new faucets in the bathrooms, installing a new shower head, and other projects. They double checked their work and answered any questions I had. While they need to come back next week to do a small part of the whole project, they were honest about what piece of equipment they thought would work, but would not. They were efficient, professional, and pleasant to be around. They made my day."
"JDL replaced a defective propane furnace and did an excellent job. The new one is installed better than the original. JDL scheduled an inspection by the county inspector also said they did an excellent job. They were efficient, timely and friendly."
Three qualities all of our people have that make us Northern Virginia, D.C. & Maryland’s #1 Home Service Provider. That’s the F.H. Furr Difference. F.H. Furr is D.C., Maryland & Northern Virginia’s premier plumber, HVAC contractor and electrician. F.H. Furr is A+ rated by the Better Business Bureau and has consistently been voted Best of Prince William County for HVAC, Plumbing and electrical.
"Everything went great. The old hot water heater was removed and then the new hot water heater was installed where I requested it to be with all of the plumbing done in a neat professional manner. It was a pleasure working with Bamford plumbing and I have been very happy with the work they have done. I would highly recommend them to anyone. "
"They did a great job! Don and Eric came over with a new pressure switch, which got my old boiler working again. I thought it was done for, but their persistence and a bit of wizardry paid off for me. I am so grateful to have them around and would not hesitate to recommend them."
"This is the second time that we have used B.A.R. In December our furnace was leaking, it was cold and Henry came out very soon after calling. He needed to do an "innovative" fix, which was awesome because we were leaving on vacation. There was no question then who I would call when we woke up recently and it was COLD. This time there was no hope for the furnace. Henry once again responded quickly to my call for help, and he has once again had to come up with a "crafty" fix with the install of a new furnace. They are the best, and I would highly recommend them for both repairs and new installs. They will work until your problems are solved. They are honest and I trust them which is a very important aspect of hiring any company."
"Continental's technicians were highly experienced, professional, considerate, respectful, hard working, and neat. They arrived on-time when scheduled. Allied's drilling and trenching crews were excellent also. This was a big messy job that took about a week and we are very happy with the work that they did. The owner of Continental, Frank Jackson, sold us the system. He provided an extensive reference list that went back at least 15 years. He was on-site for most of the job providing hands-on supervision of his technicians. His technicians are so experienced that he didn't have to be there to supervise them. Rather, I believe he was there to make sure that the job was finished on time because they are so busy. Allied had an on-site supervisor at the start of the drilling process to finalize the location of the loop bores, but their drilling crew was highly experienced and needed no supervision. Installing geothermal is a messy job. The vertical bores and horizontal trenching for the ground loop makes a muddy mess. The drillers from Allied were very respectful to the property, much more than I expected. I expected that the drilling process would make "a mess and a half" but it only made a mess! At the end of the job the ground was re-leveled and ready for seed, which has already popped and growing grass. As one of the drillers said "the mess only takes grass seed to fix". The HVAC technicians from Continental left the spaces where they worked in "broom-clean" condition. We had to do some "deep cleaning" afterwards, but this was completely reasonable. We expressed our concerns about the job to the technicians before they started work because we do not know much about HVAC or geothermal. They took the time to explain what they were going to do and how they were going to do it. They kept us fully informed about their progress and included us in the decision making process when they had more than one way of running a pipe or duct. They made us feel really comfortable and that we were getting a top-notch job. While the cost for the system from Continental was a little bit higher than their competitors I think we got value for money. In addition to the reference list we received during the sale process, we also know two families that used Continental in the recent past and they are very happy with the work that was performed. We would use Continental again and would recommend them to others. If you go with the option to integrate your hot water heater with the geothermal system (which is supposed to reduce the cost of the hot water that you use) I would reccommend that you bite the bullet and have a preheat tank installed at additional cost. We didn't do that and in retrospect we should have based on some further reading that we did about how to get the most bang for the buck from geothermal. It would be easy to install the preheat tank during a new construction project. It would be harder to install the preheat tank during a replacement project (like ours was). "
Coolant and antifreeze are technically not the same thing. The difference between the two is the ratio of water to other chemicals. True antifreeze is mainly made up of either ethylene glycol or propylene glycol, while coolant comprises one part antifreeze and one part water. However, the terms coolant and antifreeze are often used interchangeably, even by pros.
If you have a closed-system boiler that requires an expansion tank, you cannot safely operate it without one, as this risks extensive damage or even explosions. You must find a way to make room for the installation. Options include repositioning the boiler, rerouting the boiler piping to a more open area, or performing minor remodeling to create the necessary space. If you are unsure whether your boiler needs an expansion tank or how to best accommodate one, it's recommended to have a local heating service professional assess the situation. They can confirm the requirement and suggest the most practical solution.
Most installations take 2-5 days, including old system removal and setup.
A common HVAC rule is that for every 500 to 600 square feet of living space, you need 1 ton of heating or cooling capacity. Now that you know this common rule, you also need to know that it isn’t very accurate, and a dedicated pro wouldn’t use it for your home. If you talk to a pro who won’t or can’t perform a proper Manual J calculation, consider hiring someone more thorough.
There are several types of home radiators, and the most common are steam heat radiators, electric radiators, and dual-fuel radiators. Steam heat radiators are connected to a boiler. Electric radiators can operate without being connected to anything else—they just need an electrical outlet. If you have a dual-fuel radiator, you’ll see a valve at the bottom of the system with a wire coming out of it and going into a wall. These are often your towel radiators in the bathroom. The type of radiator you have will impact how you turn it on.
The Edgewater, MD homeowners’ guide to boiler installation services
From average costs to expert advice, get all the answers you need to get your job done.
The average boiler installation cost depends on size, system type, and other factors. Keep reading to learn the cost of a new boiler in Washington, D.C.
Find out the average radiator and boiler repair cost in Washington, D.C. Learn what you can expect to pay for local heating services and keep your home warm.