Get matched with top affordable plumbers in Seneca, IL

While a toilet dripping on the outside can be caused by condensation, a toilet that is constantly dripping on the inside is usually caused by a deteriorated flapper. This is one of the most common types of toilet leaks. As the flapper degrades, it won’t seal properly, and water will constantly leak into the toilet.

You should flush your water heater at least once a year, with some experts recommending a schedule of every six to 12 months (e.g., once in the spring and fall). The ideal frequency depends on several factors.

If your area has hard water with high mineral concentrations, you should flush the heater more often—typically every four to six months. Additionally, a water heater that is used frequently may require more frequent flushing than one that is used less often.

Regular flushing is important because it removes sediment buildup from the bottom of the tank. This maintenance helps improve the heater's efficiency, extend its lifespan, and prevent issues like clogs, overheating, and increased energy consumption. You can either learn to perform this task yourself or arrange for a service plan with a professional plumber.

Yes, copper pipes freeze at temperatures of 20 degrees Fahrenheit or lower. In fact, copper pipes are more likely to freeze than other piping types since they conduct energy and lose heat quickly. They’re also more difficult to insulate, since insulation may make it difficult for heat to reach the pipes during sudden surges of cold weather.

No, a larger well pressure tank will not increase or improve water pressure on its own. The pressure control on the well pump is what determines the water pressure in your home. However, a larger tank does offer other benefits. It can hold more water, allowing you to run it for longer before the pump needs to turn on. Because the pump cycles on and off less frequently, there is less stress and wear on the well system. This can lead to a longer lifespan for the pump and tank, and you may experience fewer pump-related issues that could affect your water pressure in the long run.

If you want to increase your water pressure, you can try one of the following solutions:

• Adjust the tank’s pressure settings to a higher PSI (pounds per square inch).

• Replace your current pump with one that has a higher flow rate (GPM).

• Install a water pressure booster pump in your plumbing system.

• For pressure fluctuations, consider replacing your current setup with a constant pressure system.