Get matched with top structural engineers in Clive, IA

Q: What exactly does a structural engineer do?

• <div><p>A structural engineer evaluates any structural components, like floors, foundations, walls, and roofs, to ensure they can support the structure. They also consider the soil quality in your area, potentially extreme weather conditions, and proximity to bodies of water and groundwater to ensure your building can withstand any stresses placed on it by the surrounding environment. Structural engineers work on both new and existing buildings.</p></div>

Q: Can I cut or drill LVL beams?

• <div><p>It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.</p></div>

Q: What is the typical process architects follow from concept to completion?

• <div><p>The process involves initial consultation, concept development, detailed planning, regulatory approvals, and integration of contractor work for project execution.</p></div>

Q: What is considered a structural issue in a house?

• <div><p>Any issue that affects the structural integrity or soundness of a home is considered a structural issue. In addition to foundation cracks, other signs of structural issues include roof leaks, bowing walls, sloping floors, gaps around windows and doors, and more.</p></div>

Q: How much weight does a 4-inch concrete slab support?

• <div><p>A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you&rsquo;re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Clive, IA?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Clive, IA

*The Angi rating for Structural Engineering companies in Clive, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Clive, IA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on November 02, 2024

Reviewed in November 2024
Showed up late, needed battery for stud finder, tools died and DID NOT complete project. Used my tools. Even took materials from my project so now I don't have what I need. DO NOT HIRE. Left a mess and left after an hour and said he'd return next day. DID NOT RETURN. I had to hire someone...
MTD
Request a quote
Reviewed in April 2024
All the business's personnel were very experienced and personable in conducting the removal of nine trees without any damage to close by structures. They did all the coordination with the neighboring property owners as to the significant care they will be taking
Executive Tree Service, LLC
Request a quote
Reviewed in October 2023
I needed my deck stairs repaired. This involved raising the top of the stairs up into place and engineering a beam system to support the. Ethan responded promptly and offered a solution at a reasonable price. Ethan is a hard worker, very efficient, and doesn't stop until the job is done, plus...
Home Plus
Request a quote
Reviewed in July 2019
Friendly, professional, knowledgeable, quality workmanship. My husband dropped a boat anchor on our engineered wood flooring. Two dents plus a hole the size of a 50 cent piece. We also had scratches from our refrigerator which had been pulled out and pushed sideways by the people who...
Scott's Flooring
Request a quote
Reviewed in October 2018
My wife and I have worked with several contractors over the past three years to remodel and refurbish the interior and exterior of our house. We’ve been fortunate in our choices of service providers and are pleased with most everyone we’ve worked with. But without doubt, one of our very best...
Red House Remodeling
Request a quote
Reviewed in August 2015
According to the website, the person we met with is a "Foundation Expert." Per his advice, we needed about $8000 in beams because the cement blocks showed bowing/cracking. This house is only 650 sq feet and built in the 1950s. He basically implied that the walls had extensive damage and the...
Better Basement Technologies LLC
Request a quote
Reviewed in June 2014
I have a front porch overhang supported on four posts in a concrete stoop that supports a portion of a second story bedroom. One of these posts had rotted with cracking of the concrete around the two front posts. I hired a contractor that I have worked with for years to remove the rotten posts,...
BRITTAIN & SON CONCRETE CONSTR
Request a quote
Reviewed in May 2013
Renco has not responded to requests to remedy or provide information. They their own interpretation of the repairs needed from the engineering report, but have not justified the work according to the report. Renco, made suggestions to the HOA as to the finish on the balcony, which was a lower...
RENCO Roofing
Request a quote
Reviewed in November 2011
This was our first time dealing with a contractor. We wish we had investigated more options, especially with someone located locally. This company prefabs garages in Omaha, NE and they do a pretty good job. Ron, the salesperson, was very nice and as helpful as possible. It seemed difficult...
Garage Co.
Request a quote
Reviewed in September 2011
As it turned out it wasn't something they were able to help me with at least at this point. It takes some structural repair first and then they would be able to do it. They were knowledgeable and friendly. They offered pointers on what needed to be done before they could provide their service....
Pingel Mudjacking
Request a quote

Find Structural engineers in Clive

Professional Contracting Iowa

5.0(

)

Serving Clive, IA and surrounding areas

In business since 1997

Free estimates

Emergency services offered

"Excellent job from beginning to end. They laid down 130’ of plywood to run the skid loader from the road to the spot in the backyard. Only one small narrow rut/grass removed in the yard where the skid loader slid a board while turning the corner around the garage. I'd never ever think of complaining about that. Can't even imagine the number of trips made across those boards. 14 ton of dirt and around 4 yards of concrete was moved on those boards. Definitely impressed with over-excavating and compacting rock, great job vibrating the concrete which left very few noticeable air holes and putting on cure-n-seal when not asked. Great job on the finish and they removed the remaining plywood chips with a thatch rake leaving little to no signs they were even here."

+26

Recommended by100%of homeowners

Request Quote

Cornerstone Engineering Services

New to Angi

Serving Clive, IA and surrounding areas

In business since 2023

Free estimates

Credit card accepted

With over 10 years of experience, we take great pride in our experience, expertise, \nquality, and customer service that we provide to meet the consumer's needs. It is our \nmission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.\n//\nM-F: 3pm - 6pm

Request Quote

Structural Engineering questions, answered by experts

A structural engineer evaluates any structural components, like floors, foundations, walls, and roofs, to ensure they can support the structure. They also consider the soil quality in your area, potentially extreme weather conditions, and proximity to bodies of water and groundwater to ensure your building can withstand any stresses placed on it by the surrounding environment. Structural engineers work on both new and existing buildings.

It is not recommended to cut or drill into LVL (laminated veneer lumber) beams. As major structural components of a home, their composite structure can be compromised by alterations, which can weaken them and lead to cracking over time. If you must make modifications to an LVL beam, it is crucial to consult a structural engineer or general contractor first. A professional can advise on whether it's safe and provide specifics on the appropriate bit size, depth, and directionality for any necessary drilling.

The process involves initial consultation, concept development, detailed planning, regulatory approvals, and integration of contractor work for project execution.

Any issue that affects the structural integrity or soundness of a home is considered a structural issue. In addition to foundation cracks, other signs of structural issues include roof leaks, bowing walls, sloping floors, gaps around windows and doors, and more.

A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you’re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.

The Clive, IA homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
May 30, 2026May 30, 2026
How Much Does Steel I-Beam Installation Cost? [2026 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Haley Nothstein
•
May 30, 2026May 30, 2026
How Much Does It Cost to Replace a Main House Support Beam? [2026 Data]
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Rachel Hoffman
•
May 3, 2026May 3, 2026
15 Warning Signs That a House Will Collapse
A home doesn’t collapse unexpectedly. Learn the warning signs that a house will collapse, so you can protect your family and your home.
Rachel Hoffman
•
May 3, 2026May 3, 2026
10 Signs of Structural Damage in Your Home
Keeping your home safe and structurally sound should be a top priority. Learn to recognize the signs of structural damage you should never ignore.
Rachel Hoffman
•
Apr 4, 2026Apr 4, 2026
Who Can Check if a Wall Is Load-Bearing?
Before removing a wall, make sure it’s not load-bearing. Learn the benefits of hiring a structural engineer to check if a wall is load-bearing.