Get matched with top roofers in Johnstown, CO

During the framing process, builders connect the roof to the walls with materials, including metal connectors, plywood panels, and wood blocks. These roof-to-wall connections are important and provide weatherproofing, noise and temperature insulation, protection against pests, and home integrity. The type of connector and method used will vary, depending on your home’s construction and needs, and each has pros and cons in terms of cost, noise insulation, longevity, and reliability. Talk with your home or roofing contractor about the best connectors for your roof and walls, and what they recommend for your home.

In most cases and locations, roofs with a single layer of asphalt roofing shingles won't require roof removal before installing a metal roof. However, underlayment may be necessary on roofs with moderate shingle damage. Heavily damaged roofs or ones with multiple shingle layers will most likely require removal before a metal roof can go on.

The proper specifications for furring strips can vary, so you should always consult the roofing manufacturer's guidelines or your roofer. However, general recommendations are as follows:

• Thickness: Furring strips are typically 1 to 1-1/2 inches thick, meaning standard 1-by or 2-by lumber works well. In areas with extreme winds, a thinner strip may be preferred to limit how much air can get under the roof and cause uplift. A thicker strip can add slightly more insulation but will also increase installation costs.

• Spacing: The recommended spacing for furring strips is between 12 and 24 inches apart on center. Proper spacing is crucial for ensuring good airflow, adequate drainage, noise reduction, and better energy efficiency. The ideal spacing can depend on the roof's pitch and the specific type of metal roofing being installed.

The best way to check if a roofing company is legit is by asking the roofer for their license number. They should have no issue providing you with this information if they’re legitimate. You can also look to see if they have an online presence, read reviews, and ask contractors you’ve worked with before if they know the roofing company.