Get matched with top welders in San Fernando, CA

Q: Is LVL more affordable than steel I-beams?

• <div><p>Yes, an LVL beam is more affordable than the <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">cost of a steel I-beam</a>, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you&rsquo;d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it&rsquo;s also more similar to traditional wooden beams and doesn&rsquo;t require as much retrofitting to connect joists. </p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Q: What’s the difference between a lintel and a beam?

• <div><p>The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.</p></div>

Q: What factors affect custom metalwork costs?

• <div><p>Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.</p></div>

Q: What factors affect fabrication costs?

• <div><p>Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.</p></div>

There are 7 highly-rated local welders.

Need a pro for your welding project in San Fernando, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in San Fernando, CA

*The Angi rating for Welding companies in San Fernando, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in San Fernando, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 02, 2025

Reviewed in June 2017
Excellent. I called first for a free estimate, Someone came the next day and took photos. Next day, received a written estimate, much lower than the overpriced misguided 'other vendor.' Approved quote online and the next day, bright and early, the repairs were done. Benji replaced my bent,...
The Gatekeeper
Request a quote
Reviewed in June 2015
Fantastic. Method Garage Doors and Gates personnel (project managers, welders, gate and fencing builders) were very professional in designing, fabricating, installing the wrought iron pedestrian gates, a vehicle sliding gate, and the gate operator track. On the scheduled date of...
Method Doors & Gates
Request a quote
Reviewed in April 2015
Prompt service, high quality detail work, including some metal fabrication and welding.
GB ORNAMENTAL IRON WORK
Request a quote
Reviewed in January 2014
Weld new hinges on gate door as the originals had broken because they were improperly mounted in the first place.
Greg's Portable Welding
Request a quote
Reviewed in February 2013
I had a very pleasant auto repair experience with these guys. The muffler was literally falling off of my car. I looked on Angie's List and found the listing for Joe's Muffler. I pulled up to the garage and the mechanic waved me in. He gave me a really reasonable price which I accepted. He...
Joe's Muffler & Brakes
Request a quote
Reviewed in December 2012
The guy who came out made a lot of mistakes and use poor (even dangerous) workmanship. After re-plumbing the hot water heater, he either didn't notice or tell me that I also had a gas leak in the gas line to my hot water heater! I noticed it two days later, on my own, after he was long gone. In...
HITT PLUMBING CO
Request a quote
Reviewed in April 2011
The old downspout, that burst in heavy storms last winter, was custom made of welded metal. It had a welded, angular jog to get around a plumbing access opening in the wall. The new ABS downspout has a pre-fab rounded elbow at the top and a straight pipe to the ground. The cost of a new...
Iselt Handymen Services
Request a quote
Reviewed in March 2009
Luis is VERY punctual. For the estimate, he arrived an hour earlier than expected. The day of the job, I found him outside, an hour earlier, working on the car damage to the fence. Luis & his assistant worked quickly, fastening, welding, & painting.
5 Star Wrought Iron
Request a quote
Reviewed in November 2008
Estimate was $6,750. I received several estimates from other companies, some lower, but this was just a job to them. Mitch was cheerful & creative. He could see that because of my disability, this job had to be done right. Both high & low power electrical circuits also had to be run. After...
California Electronic Gates
Request a quote
Reviewed in November 2005
ON THIS PARTICULAR VISIT MY EXPERIENCE WAS VERY GOOD, I HAD A LEAK IN MY EXHAUST, THEY LOCATED IT IN A PART OF MY EXHAUST THAT WAS NOT LEGALLY REQUIRED TO BE THERE, SO THEY CUT IT OUT AND WELDED IN A NEW SECTION OF PIPE, ALL WITHIN HALF AN HOUR.
LA TORTUGA AUTO REPAIR
Request a quote

Find Welders in San Fernando

Alfha Fence

10216 Morehart Avenue

4.89(

)

•Approved Pro

Alfha Fence

10216 Morehart Avenue

4.89(

)

•Approved Pro

Customers say: Super punctual

Recommended by 94% of Angi customers

65 local quotes requested

Its easy. Good service. Great work In service for over 15 years. We take pride in our work and want your experience to be one of a kind with a good company that stands behind their work. We are here to help you make the best decision for your new fence! May it be wood, Chainlink, Vinyl, repair, or a custom jobs we are here with 15 years experience to help you weight out the best decision possible. 1.Contact us 2.Get a quote 3. Project start Date

"They did a wonderful job at a fair price. I will hire them again when we’re ready to complete the entire fence because they did such a good job and their pricing is very competitive."

Beverly A on September 2025

"They did a wonderful job at a fair price. I will hire them again when we’re ready to complete the entire fence because they did such a good job and their pricing is very competitive."

Beverly A on September 2025

Weld LA

14621 Arminta Street Unit 3

5.00(

)

Weld LA

14621 Arminta Street Unit 3

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Recommended by 100% of HomeAdvisor customers

We specialize in welding services and much more! We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Check out all the services we offer below and call -- or-- click to schedule a free estimate today!

"I highly recommend Weld LA! I needed a wrought iron gate fabricated and installed for a dog run. They came out and gave me an estimate the same day that I contacted them. Their quote was very fair, they were professional, and had good communication throughout the process. The quality of their work and the finished project was exactly what I wanted! They were very easy to work with and I had a finished project within 5 days! I will definitely use them again!"

Annette H on May 2025

"I highly recommend Weld LA! I needed a wrought iron gate fabricated and installed for a dog run. They came out and gave me an estimate the same day that I contacted them. Their quote was very fair, they were professional, and had good communication throughout the process. The quality of their work and the finished project was exactly what I wanted! They were very easy to work with and I had a finished project within 5 days! I will definitely use them again!"

Annette H on May 2025

808

No reviews yet

808

No reviews yet

10 years of experience

Welding General handyman Hauling Text me ..........................................................

GT Steel Inc.

738 Lewis St

5.00(

)

GT Steel Inc.

738 Lewis St

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Gt Steel Inc is a full-service metal fabrication company specializing in custom welding, structural fabrication, and repair solutions. We cater to various industries, including construction, manufacturing, and residential clients, providing high-quality, durable, and precision-crafted metal products. Our skilled team utilizes advanced welding techniques and cutting-edge equipment to meet each project's specifications. At GT Steel Inc, we are committed to delivering exceptional craftsmanship, reliable customer service, and timely project completion, ensuring every job meets the highest standards of quality and safety. Whether you need custom metalwork or repairs, GT Steel Inc is your trusted partner for all things metal. Call or Text Us Now!

"Great!...reasonable price, the work was completed on time in a professional manner, I would definitely recommend GT Steel to friends and family."

Ernest T on January 2025

"Great!...reasonable price, the work was completed on time in a professional manner, I would definitely recommend GT Steel to friends and family."

Ernest T on January 2025

Steel Fighter Company

12416 San Fernando Rd

No reviews yet

Steel Fighter Company

12416 San Fernando Rd

No reviews yet

25 years of experience

At Steel Fighter, we are a family-owned business that takes pride in delivering quality work on all of our projects. With our commitment to excellence and personalized service, you can count on us to be your trusted partner in the welding industry with over 20 years of experience. ( Bonded & Insured)

? Our Services Include:•Custom Fabrication•Welding and Repairs •Ornamental Ironwork •Gates, Railings, and Fences•Metal Design.

Alonso

No reviews yet

Alonso

No reviews yet

Danz Genuine Fabrication

No reviews yet

Danz Genuine Fabrication

No reviews yet

Custom metal fabrication, certified welding, welding repair ,fence/gate fabrication,installation and repairs. Handrail fabrication. Ramps and spiral staircase fabrication.

Marco's metal works

No reviews yet

Marco's metal works

No reviews yet

Been welding and fabricating for a few years can make some super clean doors,gates,fences, handrails typically all your metal work needs. I go out of my way tk make sure the customer is happy and satisfied with the work before I ever leave the job sites

...

Showing 1-10 of 200

Welding questions, answered by experts

Yes, an LVL beam is more affordable than the cost of a steel I-beam, totaling between $50 and $200 per linear foot as opposed to the $100 to $400 per linear foot you’d pay for a steel I-beam. Not only is the wood material more affordable than steel, but it’s also more similar to traditional wooden beams and doesn’t require as much retrofitting to connect joists.

Some states require welders to be licensed and certified, while others don’t. However, it’s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they’re less likely to make a mistake that could be detrimental to your home. Use Angi’s state licensing tool to determine whether your potential hire has a welding license.

The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.

Costs depend on metal type, fabrication complexity, labor, finishing, and shipping or installation requirements.

Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.

The San Fernando, CA homeowners’ guide to welding services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Aug 15, 2025Aug 15, 2025
How Much Does Welding Cost? [2025 Data]
Get a clear estimate of welding cost for your next project. Learn what impacts welding prices, compare DIY vs. pro rates, and discover ways to save.

Get matched with top welders in San Fernando, CA

There are 7 highly-rated local welders.

Need a pro for your welding project in San Fernando, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in San Fernando, CA

Find Welders in San Fernando

Alfha Fence

Alfha Fence

Weld LA

Weld LA

808

808

GT Steel Inc.

GT Steel Inc.

Steel Fighter Company

Steel Fighter Company

Serjio

Serjio

Metal master welding

Metal master welding

Alonso

Alonso

Danz Genuine Fabrication

Danz Genuine Fabrication

Marco's metal works

Marco's metal works

The San Fernando, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Get our Angi-powered app

Get matched with top welders in San Fernando, CA

There are 7 highly-rated local welders.

Need a pro for your welding project in San Fernando, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in San Fernando, CA

Find Welders in San Fernando

Alfha Fence

Alfha Fence

Weld LA

Weld LA

808

808

GT Steel Inc.

GT Steel Inc.

Steel Fighter Company

Steel Fighter Company

Serjio

Serjio

Metal master welding

Metal master welding

Alonso

Alonso

Danz Genuine Fabrication

Danz Genuine Fabrication

Marco's metal works

Marco's metal works

The San Fernando, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in San Fernando? Check surrounding areas for Welders.

Which Welding task are you tackling?Find San Fernando Welding services on Angi who specialize in any of these tasks