How do I choose a metal fabricator?

• <div><p>Choosing the right metal fabricator for your project begins with research. Find a reputable fabrication company by searching for reputable contractors in your area, and then reviewing photos of their previous work, customer reviews, and photos of the company’s workshop.</p><p>Once you’ve narrowed down the list, contact the companies to ask about the types of metal fabrication projects they specialize and inquire about guarantees and warranties on workmanship. You should also ensure the company uses high-quality material, and ask about the schedule and turnaround time for your proposed project.</p></div>

Get matched with top welders in Sun Valley, CA

Q: Why are they called Lally columns?

• <div><p>Lally columns are named after their founder, John Lally, who owned a construction company in the 1800s. He invented the columns as a means of providing temporary support for beams and rafters in homes his company was renovating. The original Lally columns were also made of steel, although the inventory used a thicker gauge metal, which provided additional support for larger projects and long-term structural solutions.</p></div>

Q: Why choose bespoke metal fabrication for your project?

• <div><p>Custom metalwork offers durability, design flexibility, and unique aesthetics tailored to specific needs.</p></div>

Q: What’s the difference between a lintel and a beam?

• <div><p>The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.</p></div>

Q: What factors affect fabrication costs?

• <div><p>Costs depend on material type, labor, design complexity, finishing requirements, and installation needs.</p></div>

There are 7 highly-rated local welders.

Need a pro for your welding project in Sun Valley, CA?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Sun Valley, CA

*The Angi rating for Welding companies in Sun Valley, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Sun Valley, CA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 01, 2025

Reviewed in June 2017
Excellent. I called first for a free estimate, Someone came the next day and took photos. Next day, received a written estimate, much lower than the overpriced misguided 'other vendor.' Approved quote online and the next day, bright and early, the repairs were done. Benji replaced my bent,...
The Gatekeeper
Request a quote
Reviewed in June 2015
Fantastic. Method Garage Doors and Gates personnel (project managers, welders, gate and fencing builders) were very professional in designing, fabricating, installing the wrought iron pedestrian gates, a vehicle sliding gate, and the gate operator track. On the scheduled date of...
Method Doors & Gates
Request a quote
Reviewed in January 2014
Weld new hinges on gate door as the originals had broken because they were improperly mounted in the first place.
Greg's Portable Welding
Request a quote
Reviewed in February 2013
I had a very pleasant auto repair experience with these guys. The muffler was literally falling off of my car. I looked on Angie's List and found the listing for Joe's Muffler. I pulled up to the garage and the mechanic waved me in. He gave me a really reasonable price which I accepted. He...
Joe's Muffler & Brakes
Request a quote
Reviewed in December 2012
The guy who came out made a lot of mistakes and use poor (even dangerous) workmanship. After re-plumbing the hot water heater, he either didn't notice or tell me that I also had a gas leak in the gas line to my hot water heater! I noticed it two days later, on my own, after he was long gone. In...
HITT PLUMBING CO
Request a quote
Reviewed in April 2011
The old downspout, that burst in heavy storms last winter, was custom made of welded metal. It had a welded, angular jog to get around a plumbing access opening in the wall. The new ABS downspout has a pre-fab rounded elbow at the top and a straight pipe to the ground. The cost of a new...
Iselt Handymen Services
Request a quote
Reviewed in March 2009
Luis is VERY punctual. For the estimate, he arrived an hour earlier than expected. The day of the job, I found him outside, an hour earlier, working on the car damage to the fence. Luis & his assistant worked quickly, fastening, welding, & painting.
5 Star Wrought Iron
Request a quote
Reviewed in November 2008
Estimate was $6,750. I received several estimates from other companies, some lower, but this was just a job to them. Mitch was cheerful & creative. He could see that because of my disability, this job had to be done right. Both high & low power electrical circuits also had to be run. After...
California Electronic Gates
Request a quote
Reviewed in November 2005
ON THIS PARTICULAR VISIT MY EXPERIENCE WAS VERY GOOD, I HAD A LEAK IN MY EXHAUST, THEY LOCATED IT IN A PART OF MY EXHAUST THAT WAS NOT LEGALLY REQUIRED TO BE THERE, SO THEY CUT IT OUT AND WELDED IN A NEW SECTION OF PIPE, ALL WITHIN HALF AN HOUR.
LA TORTUGA AUTO REPAIR
Request a quote

Find Welders in Sun Valley

Weld LA

14621 Arminta Street Unit 3

5.00(

)

Weld LA

14621 Arminta Street Unit 3

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

Recommended by 100% of HomeAdvisor customers

We specialize in welding services and much more! We guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Check out all the services we offer below and call -- or-- click to schedule a free estimate today!

"I highly recommend Weld LA! I needed a wrought iron gate fabricated and installed for a dog run. They came out and gave me an estimate the same day that I contacted them. Their quote was very fair, they were professional, and had good communication throughout the process. The quality of their work and the finished project was exactly what I wanted! They were very easy to work with and I had a finished project within 5 days! I will definitely use them again!"

Annette H on May 2025

"I highly recommend Weld LA! I needed a wrought iron gate fabricated and installed for a dog run. They came out and gave me an estimate the same day that I contacted them. Their quote was very fair, they were professional, and had good communication throughout the process. The quality of their work and the finished project was exactly what I wanted! They were very easy to work with and I had a finished project within 5 days! I will definitely use them again!"

Annette H on May 2025

Get matched with top welders in Sun Valley, CA

There are 7 highly-rated local welders.

Need a pro for your welding project in Sun Valley, CA?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Sun Valley, CA

Find Welders in Sun Valley

Weld LA

Weld LA

808

808

Veza Construction

Veza Construction

GT Steel Inc.

GT Steel Inc.

Serjio

Serjio

Metal master welding

Metal master welding

Alonso

Alonso

Danz Genuine Fabrication

Danz Genuine Fabrication

Marco's metal works

Marco's metal works

Rockman melts

Rockman melts

The Sun Valley, CA homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Sun Valley? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Sun Valley Welding services on Angi who specialize in any of these tasks