"We talked over the phone I sent him a picture of the Electrical Panel so he could see that there was room for a new breaker. gave me price over the phone after we talked a bit about the other work to be done. We settled on the price, I ask when he could do the work he said "how about today". He came installed everything a first rate job. I would be happy to have him do more work for me."
"Our main installer was Jesus, and he carefully explained each step of the work and then went over all the information we would need to know. We are very happy with all three items, saving electricity with the SolaTube as we no longer have to turn lights on during the day in our Master bath dressing area, we hope that the Solar attic fan is helping to keep the house cooler by exchanging the air in the attic when it gets hot. In our small home office we replaced an old skylight with new double glass skylight with a shade system and this has made a big difference in the office. Sunshine Experts, LLC did a great job for us and we are very happy to recommend them when anyone asks us about our experience."
"The electrician Alsup Electric was excellent. Responsive,timely and did what a fine job in fixing the problem I rated B more because of AHS service that was slow and complicated"
"There were many things wrong in my computer (my fault and letting grandchildren on computer) Robert was so helpful, gave me many good instructions to keep everything safe, which I have written down, feel like I have a new computer. He was so excellent and experienced, took his time and was meticulous about what needed to be done. He was a pleasure to work with and I will use this company again! Linda Disy"
Pacific West Electric, LLC has a single mission: complete customer satisfaction! We strongly believe in giving our customers the most for their money. We work with only the highest quality materials and experienced, professional craftsmen. Since 2005, we have consistently focused on the needs of our customers, providing personalized attention and a stress-free experience. This approach has set us apart and made Pacific West Electric one of the leading companies in the area.\n\n
At Sparky S Electric, we take great pride in our experience, expertise, quality and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety and quality, regardless of how large or small the job.
Ernz Painting is dedicated to providing our customers with the best quality and craftsmanship. We are here to build relationships with our customers and communities. No job is too big or too small! We look forward to working with you!
When wiring a switch, the power typically comes into the receptacle first. The neutral wire goes straight to the outlet, while the hot wire is split. You'll need a wire nut to splice the hot wire back to one of the receptacles, but you will also tie another wire into that same wire nut and run to the switch. That way, you can control the flow of electricity to that particular receptacle by turning the switch on and off.
A blinking, or twinkle, bulb makes Christmas lights blink. Usually, this type of bulb has a silver or red tip, making it easily distinguishable from other non-blinking bulbs. Most packages of Christmas lights come with additional blinking and non-blinking bulbs. Additional bulbs can be purchased at a hardware store or online retailer.
Grounded electrical outlets are usually three-pronged. You can also look for a grounding clip in your outlet boxes or use a circuit tester. If you’re unsure, consult a suitably qualified electrician regarding your home's electrical safety.
If half of a string of Christmas lights is out, it is likely because of a single burned-out, loose, or broken bulb within that section. Long strands of lights often contain more than one circuit, so when one bulb fails, it can cause the entire circuit (or half the strand) to go dark. To fix this, inspect the unlit section and test each bulb to ensure it is tight and functioning properly. Replacing the faulty bulb or repairing a damaged shunt will typically solve the problem.
It might seem tempting to use 14-gauge wires for your outlets, as they can run a little cheaper. But, when it comes to electrical work, it’s best not to cut costs less you overload your circuit. A 12-gauge wire will ensure that you’re protecting the outlet (and your circuit breaker) from any potential overloads that might incur, as it can handle a little more amplitude than a 14-gauge wire.
The Tsaile, AZ homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Whether you’re shopping for a new home or simply doing a safety check on your current place, learn what factors influence an electrical inspection cost.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Nearly every electrical wire in your home has a different purpose. This article will cover the types of electrical wires, what they’re for, and how you can tell them apart.
Learn about the red flags that signal it’s time to get an electrical inspection, what it will cover, and what issues can fail these important safety checks.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
