Get matched with top electricians in Low Mountain, AZ

How far you can run underground electric depends on the wire gauge (generally AWG) and the circuit voltage. Too much voltage drop in an electrical circuit can negatively affect performance, so the smaller the voltage drop, the better. Ideally, it shouldn't exceed 3%. The smaller the wire and the longer the run, the more significant the voltage drop. 

For example, with a 120-volt circuit, you can run 60 feet of 12 AWG cable without losing more than 3% voltage. With a 240-volt circuit, you can run 120 feet of 12 AWG wire while maintaining a voltage drop of 3% or less.

Yes, professional installations typically include wiring, switches, and circuit adjustments for safe operation.

For most applications, you won’t need a neutral for 240V. There are certain codes and regulations that differ between areas so just because you technically may not need one in order for the device to function properly, it may still be a local requirement. Professionals in your area know the requirements, which is just another reason to hire one instead of taking on a project that is frankly not very DIY-friendly.

The most likely cause of accidentally flashing lights is that a regular bulb has been replaced with a flash bulb by accident. If that’s not the case, you should look for a bulb on the strand that is not quite seated properly and will lose its connection when it’s touched or moved.