"We talked over the phone I sent him a picture of the Electrical Panel so he could see that there was room for a new breaker. gave me price over the phone after we talked a bit about the other work to be done. We settled on the price, I ask when he could do the work he said "how about today". He came installed everything a first rate job. I would be happy to have him do more work for me."
"Hale Electric came and ran power and set an RV pedestal for me. The work was done in a timely manner, mess was cleaned up and most of all the work was quality. Thank you!"
"Our main installer was Jesus, and he carefully explained each step of the work and then went over all the information we would need to know. We are very happy with all three items, saving electricity with the SolaTube as we no longer have to turn lights on during the day in our Master bath dressing area, we hope that the Solar attic fan is helping to keep the house cooler by exchanging the air in the attic when it gets hot. In our small home office we replaced an old skylight with new double glass skylight with a shade system and this has made a big difference in the office. Sunshine Experts, LLC did a great job for us and we are very happy to recommend them when anyone asks us about our experience."
"This company is obviously nationwide and hires local contractors. I trusted Agies List that all contractors are licensed, bonded and have background checks. This person was a handyman and not qualified to wall mount, conceal wires, add electrical outlet. He spend five hours in my home, for a job that should have taken two hours and left the area in a disaster. The TV was hung close to the ceiling, the wires were hanging down from the TV, and the receiver was sitting on top of a plaster box because the cord was too short. He was obviously not qualified to install TV wall mounts. I have photos. As soon as he left, I called Best Buy Geek Squad. They were able to come out the next day and mount the TV professionally. I have used the geek squad in Virginia and they are highly qualified. They charge more than this nationwide company but you get what you pay for. I called Angies List the day after the disaster and said i did not want to rate this company but I wanted to talk to a manager. No one called me to apologize. I have cancelled my membership. Do not use this company unless you can be assured that the local contractor is qualified and is licensed. You should never let anyone into your home that has not had background checks. "
My name is Duke I can fix anything, repair anything, install anything under the sun free in-home quote with low prices. Give me a call if you have any handyman needs your satisfaction is guaranteed thank you in advance. I accept Venmo, Zelle and Cash App.
"The electrician Alsup Electric was excellent. Responsive,timely and did what a fine job in fixing the problem I rated B more because of AHS service that was slow and complicated"
A light switch should be at least 2 inches from the edge of the trim of a door. The location of wall studs will often help determine where to put the light switch by your doorway, and in most cases, wall studs make it impossible to install the switch closer than 2 inches. When possible, try to keep the switch within arm’s length of the entryway.
You can make a pigtail with either thermoplastic high-heat-resistant nylon-coated (THHN) wire or non-metallic (NM) cable, often referred to as “Romex.” Each pigtail requires a neutral wire, a ground wire, and a live wire. The gauge of your pigtail wires must match the gauge of those on the device.
Before the widespread use of PVC, affixing a ground wire to plumbing pipes was generally considered to be an acceptable workaround. Nowadays, not so much. There are plenty of nonmetallic water pipes and fittings out there, so any ground previously provided by the metallic piping would be interrupted in these cases, which is dangerous.
You can run a small or basic standard-size refrigerator on a 15-amp circuit. But you should plug a modern, standard-size refrigerator into a 20-amp dedicated circuit. The refrigerator needs to be on a dedicated circuit, meaning it is the only appliance and outlet on that circuit breaker. This method prevents tripping the breaker and reduces the chance of an electrical fire.
While most electrical items can be plugged into a GFCI outlet, some appliances with internal or stationary motors, such as refrigerators, vent fans, and fluorescent lighting, can cause nuisance tripping. This happens because they experience a small, normal amount of current leakage, which can cause the GFCI to trip even when the appliance is working correctly. Although this is not a safety hazard, it can be inconvenient and may cause the GFCI outlet to wear out faster. For this reason, it is often better to plug these types of appliances into a standard outlet. Additionally, electrical circuits over 100 feet long can sometimes cause tripping. Some appliances, like hair dryers, have their own built-in GFCI protection, so connecting them to a standard outlet is fine.
The Pinon, AZ homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Before you hire a licensed electrical contractor, you should learn the cost to run electric from the road to your house so you can budget for the project.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
