"These guys did an amazing job and I wish I could have give A+'s. Timing from the first call to the time they left my home was just under 24 hours. There was a minor timing issue but working together everything ended up working out perfect. I can't thank them enough as the original counter stone counter fabricator ended up backing out of doing it at the last minute. Thanks again guys as I will recommend you whenever I can!"
"Miller and his colleagues were able to do a lot of things quickly. Along with everything else, they also grabbed some old furniture that I needed help moving to the curb. They took several cares to make sure nothing was damaged during the move, including wrapping the furniture, turning off all the lights, and packaging the picture frames."
These appliances do unscrew, but you need to disconnect everything properly when you replace your garbage disposal. Make sure you shut the power off to the area first and check that it’s off with a voltage detector. Disconnect the main drain line and P-trap, and then disconnect the dishwasher drain line if you have one connected. You can then unscrew your garbage disposal using a disposal wrench. Just make sure you disconnect the electrical lines before removing your appliance.
In some cases, it’s more cost-effective in the long run to replace a garbage disposal, but it depends on the specific issue you’re having and the age of your disposal. You should ask a garbage disposal repair tech for a quote to repair your appliance and then see if it would be more worthwhile to replace it. Additionally, garbage disposals last for around 15 years, so if you know your appliance is reaching that age, it’s likely better to pay for a new garbage disposal rather than sink money into repairs.
Once you have your garbage disposal disconnected, you can remove the mounting bracket by unscrewing the bolts that are holding the bracket. You can back them out just enough to pop off the snap ring, which prevents the bottom portion of the bracket from disconnecting from the top when you unscrew the bolts. Use a regular screwdriver to pop off the snap ring, and the rest of the components should fall off by themselves.
Replacing a garbage disposal costs anywhere from $150 to $950, but the average cost is somewhere around $550. There are two types of garbage disposal units, and continuous feed disposals tend to cost more than batch feed disposals. Going for an aluminum garbage disposal is also significantly cheaper than choosing a stainless steel garbage disposal. You'll also need to factor in the horsepower of the motor, labor, and the removal and disposal of your old unit.
The most common garbage disposal size in the U.S. is 1/2 horsepower. This size is ideal for households with three or fewer people or those that don't produce much food waste. Although 1/2 horsepower can't handle the typical food waste load for a household of four (which is about 250 pounds of food waste annually) as effectively as 3/4 horsepower, it remains the most common size of garbage disposal on the market.
The Tsaile, AZ homeowners’ guide to garbage collection services
From average costs to expert advice, get all the answers you need to get your job done.
Garbage day has come and gone and your stuff still sits waiting on the curb. If you're wondering why your trash didn't get picked up, here's how to figure out what happened.
If your home is brimming with things you don’t need, find out about your options when it comes to how to get rid of trash, from junk collection to recycling.
Need to get rid of old paint but not sure where to turn? Learn who disposes of old paint to avoid illegal dumping fees and prevent damage to the environment.
