Get matched with top home inspectors in Apache Junction, AZ

The foundation, roof, and the home’s major systems (electrical, plumbing, HVAC) will take the longest to inspect since problems with any of these areas can point to safety or structural issues. An attic inspection or basement inspection may also take extra time to complete so the inspector can look for signs of moisture damage, mold, or pest problems, all of which are common in these spaces.

Failing to open your flue can lead to serious health hazards if you start a fire because the smoke will back up into your home. Breathing fire smoke, even in relatively small quantities, is bad for human lungs, and smoke can also irritate your nasal passages and eyes. Furthermore, smoke can cause damage to your interior fixtures and furnishings, at the very least leaving an unpleasant smoky smell for a long time. In short: If your flue isn’t open (or you’re not sure if it is or not), don’t start a fire to find out!

There are many things to look for when buying a brick house. Here are some of the key things you should pay close attention to.

• Lintels: Look for cracks, holes, displacement, or corrosion

• Mortar: Check to see if the mortar is old and crumbling, in need of repointing, or new. Also check to see if the mortar has a professional finish.

• Walls: Check along each side of the house. If a wall is bowing outward, this indicates a severe issue such as foundation damage or that the walls are ready to fall.

• Cracks: If there are stair step cracks in the brickwork, this indicates an unstable foundation.

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.