Get matched with top radon detection and reduction specialists in Selma, VA
Top-rated radon detection and reduction specialists.

Need a pro for your radon detection and reduction project in Selma, VA?

Select your specific project to find the pro for you.

Find Radon detection and reduction specialists in Selma

Avatar for Radon Specialists, LLC
Radon Specialists, LLC
4.8(
54
)

Serving Selma, VA and surrounding areas

Approved

In business since 2012

Free estimates

Customers say: True professional

"Jeff and his folks were a pleasure to work with. His communication regarding any delays or other issues is excellent. He is also great at answering followup questions that I have about how the system is running. It took our radon readings down to nearly zero from an alarmingly high value. We were hovering below 4 pCi for many years, but then our crawlspace was sealed and insulated and it soared in the living space. (The crawlspace itself was 20 pCi). Highly recommend."
Smith Mountain Lake
Rear of House
Rear of House
Typical Installation
Typical Installation

+7

Response time10 hrs
Response rate91%
Recommended by94%of homeowners
Avatar for Lucas Contracting, LLC
Lucas Contracting, LLC
5.0(
71
)

Serving Selma, VA and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"Found on Home Advisor, responded quickly after I reached out. Hired to install radon mitigation. Without asking....He took his shoes off once he saw we did. Cut could not have been any cleaner thru the laundry room tile and 4-6" of concrete subfloor, he didn't even break the tile! Took about 5-6 hrs to install. Post radon test came in at 0.3. Previously between 4-10. Worth every penny of the investment. You can't put a price on your health. Now we can breathe easy! Thank you Tyler Lucas!"
Entry point
Entry point
Attic fan location
Attic fan location
Fan outside

+16

Response time7 hrs
Response rate86%
2 neighbors recently requested a quote
Avatar for CSI Home and Commercial Services
CSI Home and Commercial Services
4.6(
80
)

Serving Selma, VA and surrounding areas

In business since 1995

Free estimates

Credit card accepted

"CSI was flexible and was able to schedule a home inspector the day after I got a bid accepted on a house. The inspector, Patrick, showed up on time and the inspection took about 4 hours. Patrick was responsive to any questions I had by email or live during the inspection. My one recommendation is that I requested a pest, mold, radon, and home inspection. It would be a better heads up if they explained that they sometimes outsource the radon inspection depending on availability of radon inspectors. Also, they can explain a bit more for new home buyers what is involved with a mold inspection. Patrick ended up just eyeing whether he spotted any mold. Because he did not see any mold, we did not have to pay extra for mold samples."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by97%of homeowners
Radon Detection and Reduction questions, answered by experts

If your home has a sump pit, you can integrate it with a radon mitigation system. You can accomplish this by sealing the pump cover with an airtight lid that accommodates radon vent pipes and sump pump hoses. This allows the vent pipe to redirect the radon gas outside of your home.

No level of radon is technically safe, but since it is present everywhere, complete avoidance is impossible. The average radon level in homes across the United States is 1.3 picocuries per liter (pCi/L). The Environmental Protection Agency (EPA) recommends taking preventative measures if your home's radon levels are between 2 and 4 pCi/L or higher.

The average radon mitigation system uses about 876 kWh of electricity per year, although the exact amount of electricity used will vary depending on the size of the radon fan. Once the system is installed, the annual increase to your energy bill could range from $30 to $300 per year, again depending on the size of the fan.

Mitigation can take several days depending on home setup, equipment accessibility, and achieving effective diffusion system sealed efficiency.

You'll need to test your home for radon after installing the mitigation system, then again every two years. If radon remains elevated, contact a licensed radon professional, either the contractor who installed the system or a different one, and have them evaluate the system. They may need to make some changes to improve its effectiveness and performance.

The Selma, VA homeowners’ guide to radon detection and reduction services

From average costs to expert advice, get all the answers you need to get your job done.