
The cost of a radon mitigation system depends mostly on the type of system being installed. Use this guide to learn about your options.
Get that radon out of the air
Radon mitigation system installers are state-certified professionals trained to test for radon gas and install systems that safely remove this colorless, odorless gas from your home.
Expect to pay $1,025 on average for professional radon mitigation system installation, with ongoing costs for periodic testing and fan replacement every five to ten years.
Your radon specialist will seal basement cracks and openings, then install piping and a fan that pushes radon gas upward through your attic to vent outside.
Hiring a local radon testing professional provides reliable guidance through testing, system installation, and ongoing maintenance to protect your family from this serious health risk.
If a radon test comes back positive, you'll want to get that gas out of your home, stat. Radon has no color or odor, but it can cause serious risks to your health—including lung cancer. But who installs radon mitigation systems? Learn why hiring a professional radon detection and reduction specialist is the best way to go.
According to the Environmental Protection Agency (EPA), radon is the second leading cause of lung cancer and the first cause in people who don't smoke. The naturally occurring gas has no smell, taste, or color, so the only way to know if it's seeping into your home is to hire a professional radon detection and reduction specialist near you. Also known as a radon remediation professional, these pros will know how to perform the test and the best way to remove or reduce radon levels.
If a radon test shows unacceptable levels of the gas, the detection and reduction specialist can install a mitigation system to eliminate the radon gas. The specialist will also seal areas of your basement to keep additional gas from entering your home. A professional will know how to install an effective system and how to maintain it to protect your home and family.

You should not hire a general contractor for radon mitigation unless they happen to be a licensed radon remediation pro as well. While general contractors have a multitude of skills to help with a slew of home improvement projects, radon mitigation is best left to a specialist who understands how a mitigation system works and has experience with radon detection.
Mitigating radon gas is a multi-step process that starts with testing. Here's how a radon mitigation system works.
Perform a radon test. A radon detection specialist will perform either a short-term or long-term radon test, to measure and determine levels of the gas in your air. You may also purchase a DIY testing kit and perform this step yourself.
Repeat the test, if necessary. If a short-term test returns results above 4 pCi/L, the specialist will repeat it to confirm the results and use the average of the two tests to determine the next steps. A mitigation system is a must for results above 4 pCi/L and highly recommended for results above 2 pCi/L.
Sealing cracks and openings. If a radon test comes back positive, the goal is to keep more gas from entering your home and remove existing gas. The specialist will seal cracks and openings to keep the gas from entering.
Install a radon fan and piping. To remove radon from the air, the specialist will install piping and a radon fan in your basement. The fan will push radon into the pipe, where it will travel upward and out through a vent in your attic.
Installing a radon mitigation system costs an average of $1,025. The total cost of your project will depend on your geographic location, the type of system you have installed, your home's size, and your foundation type.
There are also ongoing costs to consider, such as repeat testing after several months to confirm that the system is working. The mitigation system may also need ongoing maintenance and replacement. For example, the radon fan itself may last for five to 10 years before it needs replacing. When calculating your budget, you'll want to include the radon fan replacement cost, too.
Radon mitigation isn't a DIY job. In many states, if your home doesn't pass the radon test, you'll need to hire a professional who is state-certified. Legal concerns aside, DIYing a radon mitigation system is a risky move. If you don't install the system correctly, there is a chance that you'll make the problem worse, increasing the levels of radon in the air.
While you don't want to take the risk of installing the mitigation system on your own, you may be able to reduce your costs somewhat by purchasing a home radon testing kit.
One of my old tall evergreen trees was suddenly leaning toward the busy street in front of my house. I submitted a request for an emergency tree inspection, and Alejandro, owner of Cajete Tree Service, contacted me immediately and arrived to look at it just 20 minutes later. We agreed the...
Great company! Price was competitive, technician showed up on time and completed the job (exterior electric Radon fan replacement) quickly. Would hire them again.
1 tree was cut down and 5 others including a large willow tree were trimmed. The Grant Tree Service men were professional and cleaned up afterwards. The cost of the 6 trees were affordable. I am very happy with the results. I would hire them again.
It went so well! They were prompt and efficient! They were patient with last minute changes and the work was worth the money
D1 Roofing delivers outstanding service from beginning to end, backed by a strong warranty and expert teams. I highly recommend them for their excellence in meeting and surpassing expectations with unmatched communication. Choosing D1 Roofing was flawless decision
Seth was very professional, prompt in responding to queries about the work required , gave sincere advice as to what would be best for tree trimming and did the job timely.
I conferred with 2 other contractors before Armstrong Electric. Nick and his crew showed me that the project was not as convoluted as the other contractors made it appear to be. They completed the entire project on time. They were professional, friendly and cleaned up after at completion. I...
The technician was very professional and friendly. He answered all my questions and was very thorough. He left the fireplace area very clean . He inspected from the roof and advised me as to other work that might need to be done. There was no pressure there. I was very satisfied with the...
I had Ace Fireplace Services install custom chimney caps for my home, and the results are stunning. They fit like a glove and have added a touch of sophistication to my chimney. I can't recommend their services enough.
Storms Mobile Welding was great to work with. They were prompt, professional and did an overall excellent job on the project. I highly recommend.
From average costs to expert advice, get all the answers you need to get your job done.

The cost of a radon mitigation system depends mostly on the type of system being installed. Use this guide to learn about your options.

Get clear answers on how much radon remediation costs, including average prices, key cost factors, and tips to save money on your home’s radon mitigation.

Find out the average cost of radon fan replacement, key price factors, and ways to save. Get expert tips to budget for your radon mitigation system.

Can a homeowner install a radon mitigation system? While some parts of the project are fine for DIY, you should leave the meat of the task to a licensed professional.

How does a radon mitigation system work? Learn more about how it pulls air and radon from the soil and expels it before it can enter your house.

Need to find a qualified radon mitigation service? Learn how to hire the right pro, from certifications to questions to ask, to protect your home.