Get matched with top masons in Ontario, OR

In most cases, painting your brick house is a fine idea that can open up new aesthetic possibilities. However, the paint can slightly shorten the life span of brick, especially if moisture gets trapped underneath the paint layer. Once you paint, you’ll have to keep up with maintenance to avoid flaking and blisters.

Yes, you can limewash surfaces other than brick. Plaster, stone, stucco, and concrete can all also be limewashed. Any porous surface that will absorb the wash is a good candidate for limewash, although it won’t help much with waterproofing. If you choose to limewash over paint, you’ll need to prep before applying it to avoid a powdery, chalky finish. Shiny surfaces like metal or glass can’t absorb limewash, so it’s not suited for these.

There are many things to look for when buying a brick house. Here are some of the key things you should pay close attention to.

• Lintels: Look for cracks, holes, displacement, or corrosion

• Mortar: Check to see if the mortar is old and crumbling, in need of repointing, or new. Also check to see if the mortar has a professional finish.

• Walls: Check along each side of the house. If a wall is bowing outward, this indicates a severe issue such as foundation damage or that the walls are ready to fall.

• Cracks: If there are stair step cracks in the brickwork, this indicates an unstable foundation.

Most of the time, you don’t need to seal brickwork and can save that money for another area of home improvement. But if your brick is cracking or you live in an area with a lot of excess moisture (either in terms of rain or freezes), sealing can extend the lifetime of your home. But, make sure you use a breathable sealant, like siloxane, to allow the moisture to evaporate on its own.