Get matched with top plant watering pros in Polvadera, NM

While a normal moisture level for drywall is between 5% and 12%, replacement is recommended if you get consistent readings above 17%. At this level, the drywall is likely too compromised by extensive moisture damage to be considered safe. You can replace either the entire sheet or just the affected section. If you are unsure after a visual inspection, it is best to have a contractor or water restoration provider use a professional moisture meter to get an accurate reading.

Knowing what causes drywall damage can help stop it before it starts. Here are some of the most common causes of drywall damage: 

• Water damage from roof leaks or leaky pipes. 

• Small holes caused by doorknobs, minor accidents, and rodent infestations. 

• Wall dents stemming from moving furniture and minor accidents. 

• Wall cracks that form from a settling foundation or seismic activity. 

• Nail pops from nails and screws in the walls. 

• Large holes that are caused by accidents with heavy objects, children and pets, or sporting equipment.

The age of your home can clue you in to whether you have plaster or drywall ceilings. Homes built after the ‘70s are more likely to have drywall ceilings and walls, while older homes have plaster. You can also do the pushpin test: A pushpin will go into drywall, whereas it’s much harder to push one into a plaster wall. If you’re still unsure, ask a drywall professional to let you know which type of ceilings and walls you have.

There is no way to cut drywall without making dust, but you can reduce the amount of dust and especially the dangerous airborne particles by using manual cutting tools. Using a utility knife to score and snap your drywall will minimize dust production, and a jab saw for cutting cutouts for boxes and fixtures will generate almost no airborne dust. Even if you use these methods, you should still wear a respirator and safety goggles to avoid damage to your lungs and eyes.