Get matched with top roofers in Cleveland, NC

Whether replacing the entire roof or just installing roof shingle replacements in small areas, always pull up the old roof shingles. While you can technically put new roof shingles (but not other roof materials) over old shingles, this can add weight strain to the roof and prevent the new shingles from securing properly to the roof.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

No, a metal roof will not make your house hot. In fact, metal roofs help keep your home cooler by reflecting heat instead of absorbing and transmitting it inside. Metal also has high thermal conductivity, which means it gains and loses heat quickly. While the sun may heat the metal, the roof rapidly transfers that heat back into the air rather than retaining it. This reflective property can lead to energy cost savings of up to 40%, as your cooling system won't need to work as hard to maintain a consistent indoor temperature.