Best roofers near Leonard, MI

Yes, shingles should overhang the drip edge, typically between 1/2-inch and 3/4-inch. An overhang shorter than 1/2-inch can allow wind-driven rain to get under the shingles and damage the roof deck or fascia. Conversely, an overhang longer than 3/4-inch increases the risk of shingles getting caught by strong winds, which can lead to roof uplift. Always check your local building code for exact overhang requirements in your area.

Generally, roof flashing is installed under the shingles to create a watertight seal and prevent moisture from seeping in and causing damage. However, the exact placement can depend on the type of flashing. For instance, with step flashing, the shingles and flashing overlap each other, meaning the flashing is technically both over and under the shingles. Flashing also typically goes beneath the house siding and is often not visible from the ground.

It’s possible for a roofing estimate to change after the initial assessment, but in most cases, it shouldn’t. There’s always the risk that something unexpected will happen that causes prices to go up, like discontinued materials or your roofer discovering previously hidden damage to your decking when ripping off the old roof. However, experienced roofers should account for these circumstances in their initial estimates. Roofing contracts are binding, so always check your contract for language about how and why your numbers could change.

It’s possible to install your chimney cap in some areas, but it’s usually better to hire a professional. Before you attempt a DIY chimney cap installation, check to see if your local building department requires a permit. If it does, you should hire a professional to pull the permit and complete the work for you. Even if you don’t need a permit, getting up on your roof is dangerous, especially if you have an aggressive pitch or slippery roof material, like metal. Hiring a chimney professional guarantees the job is done correctly and keeps you safe from injury.