Get matched with top countertop and backsplash pros in Ishpeming, MI

You can put hot pans on porcelain countertops. Porcelain is highly resistant to heat—it’s manufactured at around 2,500 degrees Fahrenheit, so it can withstand a ton of heat without cracking or damaging. Even though the high heat is a plus, you should still be cautious when putting hot surfaces on porcelain countertops.

The standard kitchen counter size is typically between 24 to 25 inches wide and 25 to 26 inches deep. Wider countertops are also common, with widths of 30 to 36 inches among the most popular choices. Note that these are just general guidelines, and there is flexibility to custom the size of countertops to suit individual needs and the space.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

One of the best ways to use bar-height countertops is as a divider. If you have an open concept home, this can visually separate your kitchen from your living space. This countertop is also ideal for entertaining. You can cook in your kitchen, while your guests can sit at the island and be at a similar level.