Top-rated garbage disposal installation pros.

Get matched with top garbage disposal installation pros in Wilmette, IL

Enter your zip and get matched with up to 5 pros

Need a pro for your garbage disposal repair project in Wilmette, IL?

Select your specific project to find the pro for you.

TRUSTED BY WILMETTE, IL HOMEOWNERS

  • Average homeowner rating star icon4.5
    Average homeowner rating
  • Verified reviews icon2.6k+
    Verified garbage disposal installation services reviews

Find Garbage disposal installation pros in Wilmette

Avatar for Lincoln Sewer & Drainage
Lincoln Sewer & Drainage
4.8(
640
)

Serving Wilmette, IL and surrounding areas

In business since 1970

Free estimates

"Great! They were unable to get all the way to the street from the catch basin. It was suggested I add a sewer clean out assure all the roots were gone and make it easier for future cleaning. This was suggested in the past, by another company , but the cost was out of sight. This company was very fair in price for both the cleaning (which included the inspection with the camera) and for the clean out installation."
Recommended by97%of homeowners
Avatar for Park Ridge Appliance Service
Park Ridge Appliance Service
4.9(
627
)

Serving Wilmette, IL and surrounding areas

In business since 1981

Credit card accepted

"Nick showed me that the wall switch was in the "off" position. How stupid I felt as I had checked for a switch under the sink not realizing the switch (which I never use) was on the wall. But while he was here, he checked the filter which needed cleaning, reminded me how to remove it and clean it and installed a galvanized electrical box and cover to enclose the bare wires from the unused garbage disposer. He also provided me with a free sample of a dishwasher cleaner I can order from Amazon. So this was not a wasted service call. Nick and his assistant were early in arriving, friendly and cleaned up after their work. I have used Park Ridge before in my other home and would certainly use them again."
Recommended by98%of homeowners
Avatar for Green Tech Plumbing Co
Green Tech Plumbing Co
5.0(
63
)

Serving Wilmette, IL and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"Nick did a great job and quickly got my drain unclogged. The previous owner had appeared to have leaks at some point and rather then replace the P trap they had just glued it over and over. Nick was able to get it removed and replace it with new pipes. I will definitely call Green Tech again for all my plumbing needs."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+11

Recommended by100%of homeowners
Avatar for Intelligent Service: Plumbing, Heating, Cooling & Drain Cleaning
Intelligent Service: Plumbing, Heating, Cooling & Drain Cleaning
4.7(
286
)

Serving Wilmette, IL and surrounding areas

In business since 1982

Emergency services offered

Credit card accepted

"It turned out that the ejector pump was OK, but the switch that controlled automatic discharge of the pump was not working. The estimate to do the work was quite high. ($653.00). Here's how it broke down: [1] Parts: (the switch): $193.27, [2] Labor: Remove Ejector pump from basin, install new switch, and then seal basin back up. Note: it took the plumber less than 1 hour to do this job. So he charged us $459.73 an hour for labor! This company must have neurosurgeons moonlighting as plumbers. We only agreed to this flat rate due to the emergency situation of water flowing into our basement when we did the laundry or flushed the toilet downstairs. Lesson learned: never hire a plumbing company that does their work for flat fees. The technician Steve was certainly knowledgeable and efficient, but his services do not warrant $460 an hour! This job should have only cost us about $400 at the most, not the $653 charged. I suggest that you do not use this company unless you don't mind spending a lot more money than you need to. To provide context, we completely replaced our ejector pump a few years ago and the cost was $500. Caveat emptor."
Shower System
Storm Pro Back Up Pump
Navien Tankless water heaters
Recommended by91%of homeowners
Avatar for CJ Plumbing & Heating
CJ Plumbing & Heating
4.8(
51
)

Serving Wilmette, IL and surrounding areas

In business since 1991

Free estimates

Emergency services offered

"Trust! I think trust is most important in choosing an expert to fix a problem. Of course experience, knowledge, ability and integrity are also needed. But trusting the reviews written by others or trusting the recommendation of a friend is sometimes all we have to go by. I had a clogged drain about 15 feet “downstream” from my kitchen sink. It was the result of overzealous use of the garbage disposal. I tried snaking the drain myself but the clog was too big (turns out about 2 feet of drain was totally blocked). I did research on several websites looking for a plumber in my area who I could trust to do the work right - at a fair price. I narrowed the list to 4 companies. At 7:15 PM on a weekday I called each of them. I got two answering services that could not answer any of my technical questions, another said they would have someone call me back “in a few minutes” (never happened) and then there was Dmitry. Dmitry is one of the owners of CJ Plumbing. He answered the phone himself. He was able to discuss my issue intelligently, explain the likely scenarios and give me an estimated price range (min and max) for the job. It was clear from his questions and his input that he understood the problem and knew the likely solutions. As it turns out, he was absolutely correct about the issue and what it would take to fix it. I wanted to consider what he said before making a commitment. He said I could call him back anytime in the next few hours. I called several hours later and again he answered the phone and we scheduled a visit for the following afternoon. The plumber who showed up (not the person I spoke to) was a delight to work with. He was professional, polite, and patient as he answered my many questions. He tried a few “easy” options to fix the problem (e.g. using a powered drain snake). When those did not work he said the best option was to cut out the clogged section of drain (which he had located) and replace it with a new section of pipe. The clogged part of the pipe included two 90 degree bends. He removed that section and replaced the sharp bends with pairs of 45 degree bends to allow waste to pass through the more easily. The drain pipe ran along the ceiling of my unfinished basement so there was direct access to the pipe. After replacing the section of pipe he verified that there were no leaks and cleaned up the area of the basement where he worked as well as the area under the kitchen sink. He even cleaned the sink. I was VERY pleased with his work and with his personality. The cost of the repair was within the range quoted on the phone (though near the higher end). My trust in CJ Plumbing was rewarded by their performance and their honesty. I would definitely use them again and would recommend them to friends and family. I recommend them to YOU."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+102

Recommended by93%of homeowners
Avatar for Reliable Basement Services LLC
Reliable Basement Services LLC
4.7(
208
)

Serving Wilmette, IL and surrounding areas

In business since 2008

Free estimates

Credit card accepted

"A lot more to discuss about this than I would like. Drain tile construction seems fine, which is the most important part of this project by far! We will learn more upon a rainy season in the fall or spring. Demo was not as clean as we would have liked. We have steel studs in basement, so they pushed out walls to put drains to window wells behind electrical conduit for outlets. This ripped the drywall off of studs and pulled framing away from windows. We had to rerun electricity around the new drains and do some repairs because of this. If we had wood studs, we do not think that they would not have been able to cause as much damage, so this shortcut cost us some work. There is also a small dent in our ceiling on the main floor from when they were carrying materials. Dust was everywhere. They left the door to the basement open during demo and construction so dust was all over our main floor. Also, they mixed the concrete in our garage, so everything we move out of the basement to avoid dust is now covered in concrete dust. This is very difficult to remove since mixing with water will form more concrete. They asked what we need from them to fix this, but we do not see a good solution other than wiping down each individual item ourselves. It's a lot of work we spent a lot of time trying to avoid by following Alex's recommendations. There was a miscommunication and Reliable Basements did not put the new sump pump in, plus the check valves were put 2 inches from the lid of the sump pit leaving the pit inaccessible to us. After several attempts at communicating with them, they responded and replaced it and fixed the check valve placement in a timely manner. They missed a crack in the foundation, but were quick to come out and fill it for the same price they offered during the drain tile installation."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Recommended by95%of homeowners
Avatar for J. Blanton Plumbing
J. Blanton Plumbing
4.4(
377
)

Serving Wilmette, IL and surrounding areas

In business since 1989

Free estimates

Emergency services offered

"Mike and Matt were great, they were skilled, efficient, and friendly. I thought replacing an under-mount stainless steel sink in an existing granite cutout would be very difficult at best. I knew replacing the faucet and disposal would be a routine job. I was pleasantly surprised that the entire job went fine and they were finished in 2.5 hours. They cleaned up the work area and hauled away the old sink, etc. I will say that their prices are high, but I was willing to pay for quality work, especially with the tricky sink replacement."
Jack Blanton
Jake Blanton
Our Company
Recommended by84%of homeowners
Avatar for H20 Plumbing and Sewer Services
H20 Plumbing and Sewer Services
4.6(
64
)

Serving Wilmette, IL and surrounding areas

In business since 1997

Emergency services offered

Credit card accepted

"Todd and his team are professionals. They were very thorough and progressed through multiple steps of rodding and jetting before finally having to dig in the yard to add a cleanout to resolve my sewer issue. The entire team was contentious and intent at every step. Unfortunately, my 60+-year-old pipes needed a bit more than could be managed from inside the house. Not only were they professional and aggressive in resolving the issue, but they were also very responsive to our urgent needs and showed up when they said they would for every visit. Great guys and fair pricing...highly recommended"
Recommended by95%of homeowners
Avatar for Aabest appliance
Aabest appliance
4.8(
986
)

Serving Wilmette, IL and surrounding areas

In business since 1986

Free estimates

Credit card accepted

"Replaced garbage disposal, and cleaned out frozen build up in fridge. Installed a little rod that hopefully will prevent future back ups. All done in under 2 hours. Friendly couple of guys. Efficient, full of good advice, good at explaining the issue, and also good with small talk."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+9

Recommended by97%of homeowners
...
Showing 1-10 of 205
Install Garbage Disposal questions, answered by experts

On average, a garbage disposal can last anywhere from 7 to 12 years, with many models functioning well for about 10 years. With heavy usage, a motor may last a minimum of five years, while grinding plates will wear down over time. It's generally a good idea to consider a replacement if your unit is approaching the 10-year mark. Other signs that it's time for a new disposal include frequent leaks, persistent clogs, lingering odors, lack of power, or unusual noises. If your unit is not that old, it's worth investigating if a less expensive part, like a rubber seal or a loose hose, is causing the issue.

To prevent drain clogs, perform regular maintenance and cleaning. Avoid disposing of substances like grease or coffee grounds down the sink. Additionally, installing and routinely using drain strainers can help catch debris and prevent blockages from forming.

Most garbage disposals have a reset button that can be triggered with a tool as simple and accessible as your index finger. That said, if you need to perform a more in-depth troubleshooting step, like manually moving the arms inside the unit or rotating the impeller plate, a hex wrench is the most common tool you’ll need. Most garbage disposals come with a hex wrench.

Never put glass in the garbage disposal. It can damage your disposal or eject shards of glass out of the disposal and cause injury. If you get broken glass in your garbage disposal, turn it off and cut the power from the breaker, use a tool like pliers or tongs to remove the glass, and use a wet-dry vacuum to remove the remaining glass pieces. If you can’t access the disposal safely, call a garbage disposal repair pro.

You may be able to install a garbage disposal on your own, especially if you're handy or have some experience with plumbing. However, if you have any concerns or want to make absolutely sure that the connections are installed correctly, you may be better off hiring a local garbage disposal installer to do the job. 

The Wilmette, IL homeowners’ guide to garbage disposal installation services

From average costs to expert advice, get all the answers you need to get your job done.