Get matched with top masons in Mokena, IL

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

The material you use depends on how hard-wearing your steps need to be and what you want them to look like. The most common stone for exterior steps is bluestone. It’s hard-wearing and durable, and bluestone steps cost between $15 and $30 per linear foot. Limestone is also a popular option and is mid-range, costing $25 to $50 per linear foot. You should always consider the specific requirements of your project before ordering any materials.

Yes, it is usually possible to repair a damaged brick mailbox. A professional brick mason or masonry contractor can perform the repairs. They can assess the damage, provide an estimate, and help you determine if the repair is worthwhile based on the mailbox's value and the extent of the damage. The repair process may involve sourcing replacement bricks and mortar. Damaged bricks can be cut out and replaced, or the mortar joints can be cut out and retucked. It's important to note that the new mortar may differ in color from the original. If the mailbox insert itself is damaged, it can typically be cut out and replaced as well. If your brick mailbox has been completely destroyed, you should check with your local building code enforcement office before rebuilding, as some areas do not allow brick mailboxes due to the potential hazard they pose to drivers.

Real stone is exactly what it sounds like: It’s real stone sourced from the earth without additives. It is durable and unique, but it’s difficult to work with because of its weight, challenge in sourcing, and high cost. Stone veneer mimics the look of real stone but is actually engineered with a mixture of Portland cement, natural minerals, and a colorant. While it’s more affordable and easier to work with, it’s less durable and may appear manufactured to the trained eye.