Hi My Name is Randy Curtis, Co-Founder of Pelicano Pools LLC, our Fiberglass division of Florida Pools LLC. Our Contractor is Debbie Rausch ~ CPC1457593\n\nWe are backyard design specialists and dealers/installers of San Juan Fiberglass Pools, a fiberglass manufacturer in the state of Florida since 1958. \n\nWe also design and build custom concrete pools here in Southwest Florida since 2003. \n\nWe offer in-house 3D design, permit ready construction plans, permit ready engineering plans and save our clients over $20,000 on average vs our competitors estimates. \n\nLet's get you swimming in under 90 days!\n\nCall Randy today and make an appointment for a free Yard Survey and design consultation. \n(239) 375-7244\npelicanopools.com
"It went well. The young man was here for 75 minutes and fixed two leaks. He was very nice and very good. The charge of $400 for 1 hour and 15 minutes was a bit steep. He didn't use any specialized equipment, just him diving in the pool and checking the leaks with colored liquid."
"They fit me in their schedule the next day, and fixed the problem right away. I've used them a handful of times now, and always been satisfied. They have helped keep a couple of old A/C systems running beyond their time, and installed a complete new system for me. I've tried a couple other companies, and felt fortunate if they even answered their phone. Core Mechanical of Summerland Key has always been responsive and always fixed my A/C problems right the first time. "
"The pool ninjas are very professional, efficient and detail oriented, my pool was a mess, a tough job for anybody and these guys made it look brand new so effortlessly ,if you want quality care these are the people to go, they are now my go to."
"This pool guy took about 4 hours to do my pool and his mannerisms were amazing. He greeted himself to me and stayed very professional through my entire experience"
We offer an overheat protection switch to keep your pumps protected. Our price point is far better than what would cost you to replace your well and centrifugal pumps. Preventive care is always better than reactive care. Aside from distributors and pump manufacturers, we don't have return clientele because our switch works perfectly. 5 minute installation and a product made in USA that is less than $200. Patented product.
"The tech was very knowledgeable and went above and beyond to satisfy us. Our faucet was broken would not attach to the sink as the copper seal broke to the water lines."
Install Above Ground Pools questions, answered by experts
An easy way to know whether your sand filter has enough sand is to check how full the filter is and what the sand looks and feels like. The filter container should be two-thirds to three-quarters full of sand. Look for interior marks indicating the ideal sand level. If you put your hand into the sand, it should flow through your fingers without clumping. The filter pressure gauge is also an easy indicator—the right amount of sand leads to normal pressure, while too much or too little sand can cause high or low pressure.
Generally, you should run your pool pump for eight to 12 hours a day to keep your water clean and chemical levels balanced. The ideal runtime can vary depending on your specific pump type. While running the pump as much as possible is ideal for cleanliness, it can increase electricity costs. To save money, you can run the pump strategically during non-peak hours when electricity is cheaper, which is often in the evenings or at night. The hours do not need to be consecutive.
How often you should add water to your pool depends on how quickly the water evaporates. Keep an eye on your skimmer box, if you have one. Top up the water in your pool if you notice the water levels are lower than the bottom third of your skimmer. This helps prevent damage to your pump.
Replace all the water in your pool every five to seven years, depending on how often you use your pool, the weather, and whether or not you close your pool for the winter.
At noon, when the sun is at its highest point, sunlight can naturally increase the temperature of a pool by 0.7 degrees each hour, but this can depend on other external factors. For example, evaporation caused by the sun will cause a pool to lose up to 5 degrees for every 1/2 inch of water evaporated. Using a water heater will produce more reliable results.
You shouldn’t swim in a pool with algae. When there’s algae, there’s also bacteria that’s feeding on the algae. Also, algae-infested pool water is often chemically imbalanced, which means germs like Cryptosporidium, Giardia, and E.coli could be present. These germs can cause a range of illnesses from gastrointestinal issues, to rashes, and respiratory problems.
The best thing to do is to get rid of the algae first, test and balance the water, and then you can enjoy swimming without any worries.
The Labelle, FL homeowners’ guide to above ground pool installation services
From average costs to expert advice, get all the answers you need to get your job done.
Above ground pools are more affordable than inground pools, so can you put an above ground pool in the ground to save money? Learn when it’s safe to do so.
