
Accessory dwelling units can be a smart investment, but your ADU cost will depend on the size, type, and materials you choose. Here’s how it breaks down.
To calculate stair steps, you’ll need to know your total riser and riser height.
Total rise is the distance from the bottom of the floor to the top.
Most guides recommend a riser height of 7 to 7.75 inches.
A general contractor or carpenter can build and install your staircase.
Building or remodeling stairs can feel tricky, but figuring out exactly how many steps you need doesn’t have to be. By understanding a few simple measurements—like the total height between floors and the ideal height of each step—you can plan a staircase that’s perfect for your space, and perfectly safe, too. Our formula will help you learn how to calculate stairs steps to take out the guesswork for you.
The number of steps in a staircase depends on the total height from one step to the next, with each step typically rising between 7 and 7.75 inches. Use the table below to estimate how many steps you'll need based on common floor heights.
Floor Height (Feet) | Floor Height (Inches) | Number of Steps |
---|---|---|
8 | 96 | 13–14 |
10 | 120 | 16–17 |
12 | 144 | 18–20 |
14 | 168 | 21–24 |
16 | 192 | 24–27 |
Figuring out how many steps your staircase needs is easier than you might think. Once you know how tall the staircase needs to be (aka total rise), you just divide that height by how tall each step will be (aka riser height). A little math now can save a lot of hassle later—and helps make sure your stairs are up to code.
Number of Steps (risers) = Total Rise ÷ Riser Height
You can’t calculate the number of steps you need for a staircase without the total rise and riser height. Getting these measurements right is essential for building safe, comfortable, and code-compliant stairs.
Typically given in inches for calculations, total rise measures the vertical distance from the lower floor to the upper floor. You can calculate it with the following formula:
Total Rise = Finished Floor Height (Upper Floor) – Finished Floor Height (Lower Floor)
For an unbuilt staircase, riser height won’t be a concrete measurement but instead a personal preference for how tall you want each step to be. Most guides recommend a riser height between 7 and 7.75 inches, so you may want to look at portfolios of different heights to figure out what works best for your space.
Even the most experienced and skilled DIYers are unable to construct and install a staircase, which is where your local general contractor or a carpenter near you comes in. A general contractor is best for larger remodels, while a carpenter is better for smaller, more custom projects. Whichever route you choose, make sure whoever you hire is licensed and insured and has a portfolio of their work to show you.
From average costs to expert advice, get all the answers you need to get your job done.
Accessory dwelling units can be a smart investment, but your ADU cost will depend on the size, type, and materials you choose. Here’s how it breaks down.
Knowing how much it costs to renovate a house will help you plan and budget appropriately. Use this guide to get a rough estimate for your project.
Get a breakdown of home remodeling costs by project, from a minor bathroom update to a full kitchen remodel. Learn what factors affect the cost of a home remodel.
Learning how to fix cracked grout can save you hundreds in labor costs and keep your tile floor, shower, or counter in good shape. Here’s how to do it.
How far apart should you space deck spindles? This spindle spacing calculator will help you determine how many spindles you'll need for each section of railing.
There are lots of different types of shower door seals to keep your bathroom dry. We’ll show you what they are and where they work best.