Get matched with top door pros in Amanda, OH

The cost of folding patio doors is higher than the typical patio door cost because of their size, complex mechanisms, and additional hardware needed to operate them. These doors may stretch as far as 18 feet, require specialized installation from an expert, and have many more moving parts that could malfunction if not installed carefully.

A slab door is a standalone door without a frame or hardware. A prehung door is a complete set that includes the door, frame, hinges, and sometimes the doorknob and lockset.

In most cases, a prehung door is the better and easier option to install, especially for DIY projects or exterior applications, as they often come pre-weatherproofed. They require fewer tools and less experience to install properly. Although prehung doors are heavier and have a higher upfront cost, the investment is often worthwhile for a complete upgrade that includes a new frame.

A slab door may be a better choice if you are on a tight budget, have a custom-sized wall opening, or only need to replace the door while keeping the existing frame. While the initial cost is lower, you will need to purchase all the hardware separately and do more DIY work to hang it, which may not result in significant time or money savings.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.