Get matched with top marble restoration pros in Walhalla, ND

Engineered quartz is an artificial, nonporous material made from a mix of mined ground quartz, polymer resins, and pigments, making it a lower-maintenance option. In contrast, quartzite is a natural stone composed of sandstone, which makes it highly resistant to heat but often requires sealing and more careful upkeep. You should clean both types of stone with non-abrasive cleaners that have a low or neutral pH, avoiding acidic cleaners like vinegar, as well as wire brushes and scouring pads.

You can resurface existing countertops as long as they’re not significantly damaged. Of course, it does depend on the material. Wood, natural stone, quartz, and even laminate are all good candidates for resurfacing. If you have tile, you may want to just replace the damaged tiles rather than resurface the entire countertop.

Deciding between marble and granite for kitchen countertops depends on your personal priorities, budget, and style. Both materials have similar costs for material and installation.

Marble offers a luxurious aesthetic and timeless beauty, but it is more expensive and requires more maintenance. It is susceptible to staining and etching from acidic substances like coffee, wine, or tomato sauce if spills are not cleaned up quickly.

Granite is highly durable, heat-resistant, and easier to maintain, making it a practical choice for busy kitchens.

Both materials should be sealed to protect against damage, but they can still be vulnerable to stains if spills are left on the surface for too long.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.