"Anthony did a fabulous job on our ceilings. He covered everything before painting and was very careful, detailed and professional. He's obviously been painting for a long time. I had no doubt that he knew what he was doing. I highly recommend Rainbow Painting!"
"We’ve used Fix-it all for several projects the past few years. Mike was the guy sent out to remodel our bathroom. I’m very satisfied with that final result.
Joe repaired our garage door trim and seals. He did an excellent job and was done in no time. Very satisfied with that project too.
Kayan; Joe and Jesse just finished up our wooden fence repairs and did a very professional job. I’d recommend Fix-It-All for all your home repairs."
"The job was top quality, supper accommodating, reasonable, and they completed the job right away and finished in one day! Awesome experience and highly recommend. Very professional!"
"Freddie was wonderful to work with. She painted my daughter's bedroom and did it in a very professional manner. She was fun to deal with and really cared about the quality of work that she did. FABULOUS JOB!"
Here at Express Painting, LLC, we specialize in all painting needs for all residential properties and homeowners. We are known to provide the best in quality of work at great prices. Our integrity, professionalism, and attention to detail set us apart from the rest. Give us a call today, we are happy to provide a free estimate and look forward to speaking with you!\n\n \n
Yes, you can and should paint or stain pressure-treated wood to help prevent the boards from cracking. However, you must wait for the wood to dry out completely before applying any finish. Freshly treated wood can take weeks or even months to dry; a common recommendation is to wait three to six months. To check if the wood is ready, perform a simple water test: drip some water onto the surface. If the water beads up, the wood is still too wet and needs more time to dry. If the wood absorbs the water, it is dry enough to be painted or stained. You can proceed with building your deck or fence while the wood is still wet, but you will need to wait to apply the paint or stain.
Rags used with oil-based stains are highly flammable and can spontaneously combust in the right conditions. To reduce the fire risk, throw them in a metal container after use and add rocks on top to secure them. Add an inch of water and seal the container. Take the rags in the container to a hazardous waste factory as soon as possible.
If your cedar fence is new, don’t delay. Unlike treated pine, you don’t need to wait months for the wood to dry out for it to accept stain. With cedar, the sooner, the better. Seal cedar within two weeks of installation to prevent the sun from fading its red color.
If you want to achieve a deeper, darker stain color, wait 5 to 10 minutes before wiping it off. However, wipe it off faster for a lighter tone. When wiping off the stain during this part of the process, be sure to work in the direction of the wood’s grain for best results.
You can apply stain over peeling stain, but it’s not a good idea. Your old stain will get in the way of your new stain bonding to the wood, so you’re likely going to see the same issue again shortly after application. Your best option is to sand off the old stain and clean the surface thoroughly before applying new stain.
The Hebron, ND homeowners’ guide to painting services
From average costs to expert advice, get all the answers you need to get your job done.
The cost to paint the interior of a house depends on size, layout, type of surface, and more. Learn what factors can influence your total in this guide.