Top-rated painters.

Get matched with top painters in Elgin, ND

Enter your zip and get matched with up to 5 pros

Need a pro for your painting project in Elgin, ND?

Select your specific project to find the pro for you.

Find Painters in Elgin

Avatar for Fix It All
Fix It All
4.4(
7
)
Painting or Staining - Small Projects

Serving Elgin, ND and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

"We’ve used Fix-it all for several projects the past few years. Mike was the guy sent out to remodel our bathroom. I’m very satisfied with that final result. Joe repaired our garage door trim and seals. He did an excellent job and was done in no time. Very satisfied with that project too. Kayan; Joe and Jesse just finished up our wooden fence repairs and did a very professional job. I’d recommend Fix-It-All for all your home repairs."
Recommended by66%of homeowners
Express Painting, LLC
New to Angi
Interior Painting or Staining: 1 - 2 RoomsPainting or Staining - Small Projects

Serving Elgin, ND and surrounding areas

In business since 2014

Free estimates

Here at Express Painting, LLC, we specialize in all painting needs for all residential properties and homeowners. We are known to provide the best in quality of work at great prices. Our integrity, professionalism, and attention to detail set us apart from the rest. Give us a call today, we are happy to provide a free estimate and look forward to speaking with you!\n\n \n

Response time1 day
Showing 1-10 of 30
Painting questions, answered by experts

Maintain your wattle fence by inspecting it at least twice per year for loose weaving and degrading branches. Replace any seriously degraded sections, ensure water drains properly around the posts, and trim any sprouting branches if you used green wood. If you notice the weave loosening, you can often tighten it by gently pushing down on the top branches. You can also apply a natural wood preservative every two to three years to extend the fence's lifespan.

Applying a sealer or topcoat after staining wood is highly recommended, though not always strictly required. A sealer protects the wood from moisture, UV rays, and weather-related issues, which is especially important for outdoor surfaces like decks and fences. It also enhances the stain's durability, prevents fading over time, and gives the wood a cleaner, more professional-looking finish. For some indoor applications, a sealer may not be necessary, depending on the type of stain used and the level of protection needed. It's always best to check the stain manufacturer's recommendations and consider the wood's intended use and exposure when deciding whether to apply a sealer.

While the answer varies based on weather, 10 a.m. is a good time to start painting. The dew will have dried, meaning there’s no moisture on the house, and the temperature will likely be moderate and the sunlight less direct. Starting mid-morning should also give you enough daylight and pleasant weather to work on the job for several hours.

When applying multiple coats, wait four to six hours for each coat to dry. Not waiting long enough can result in streaks, peeling, and uneven color. Plus, it will be more difficult to discern where the second coat has already been applied.

Yes, you can waterproof any wood that has not already been treated. A good way to test this is to splash some water on it. If the water starts to bead up, the wood is treated and most likely doesn’t need another coating.

The Elgin, ND homeowners’ guide to painting services

From average costs to expert advice, get all the answers you need to get your job done.