"We’ve used Fix-it all for several projects the past few years. Mike was the guy sent out to remodel our bathroom. I’m very satisfied with that final result.
Joe repaired our garage door trim and seals. He did an excellent job and was done in no time. Very satisfied with that project too.
Kayan; Joe and Jesse just finished up our wooden fence repairs and did a very professional job. I’d recommend Fix-It-All for all your home repairs."
"I have been working with Trent for several years now. He always gets the job done right and I donâ t have to â manageâ him. He is well rounded and can do any project I put in front of him."
"Helped lead building of a steel building with multiple windows and doors, including 3 overhead doors. Job included framing in windows and door jamb and insulation and installing the metal siding and roof as well as some finishing work, flashing, J channel, etc. The building was strong and all windows and doors fit correctly. Working with a steel building was new for Alex, so he had a learning curve changing over from standard building but did a good job showing up and getting project done."
With years in the industry here at SennSational Construction we pride our company on attention to detail, punctuality, reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. Our attention to detail is that of no other. We look forward to earning your business. Give us a call today!
"The job was top quality, supper accommodating, reasonable, and they completed the job right away and finished in one day! Awesome experience and highly recommend. Very professional!"
"Quick response to give an estimate and get work done. Cleaning was thorough and Ms. Deitz and assistant were careful not to damage garden. Area on ground under gutters was cleaned. Ms. Dietz was efficient and accommodating."
The best time to stain a fence is when the weather is dry and temperatures are between 50 and 90 degrees Fahrenheit. Late spring, early summer, and fall are typically the best seasons for this project. You should avoid staining during very hot weather, like in the middle of summer, or when it is raining. Heat and moisture can cause the stain to dry unevenly. Likewise, if it's too cold, such as in winter or early spring, the stain may not be able to dry fully. Before you start, check the forecast to ensure there will be no rain and low humidity for at least a few days.
When applying multiple coats, wait four to six hours for each coat to dry. Not waiting long enough can result in streaks, peeling, and uneven color. Plus, it will be more difficult to discern where the second coat has already been applied.
Yes, you can and should paint or stain pressure-treated wood to help prevent the boards from cracking. However, you must wait for the wood to dry out completely before applying any finish. Freshly treated wood can take weeks or even months to dry; a common recommendation is to wait three to six months. To check if the wood is ready, perform a simple water test: drip some water onto the surface. If the water beads up, the wood is still too wet and needs more time to dry. If the wood absorbs the water, it is dry enough to be painted or stained. You can proceed with building your deck or fence while the wood is still wet, but you will need to wait to apply the paint or stain.
Limewash and whitewash are two techniques used to give brick a light, matte finish, but they differ in composition, application, and permanence. The best choice depends on your aesthetic goals and the specific surface.
Composition
Limewash: A natural and environmentally friendly option made from limestone, water, and sometimes pigments. It is breathable and soaks into porous surfaces like brick.
Whitewash: Traditionally made from lime, water, chalk, and binders, but a similar look can be achieved with watered-down white paint. It is paint-based and sits on top of the surface.
Appearance and Finish
Limewash: Provides a natural, textured appearance that allows the brick's character to show through. It offers a more traditional finish.
Whitewash: Creates a softer, more opaque finish, often used for a rustic or shabby-chic style.
Application and Permanence
Limewash: Is semi-permanent and can be removed, making it a good choice if you might want to change the look in the future. It requires more skill to apply and cannot be used on previously painted brick.
Whitewash: Is a more permanent solution. It is more forgiving to apply and can be used on painted brick. However, because it sits on the surface, it can trap moisture.
Ultimately, if you want a breathable, natural, and reversible finish for unpainted brick, limewash is a great option. If you need a more permanent, opaque coating that can be applied over painted surfaces, whitewash is the better choice. Whitewashing may also be more economical, costing approximately $1.40 to $4.20 per square foot.
You should inspect the area regularly for rust, clean it with a wire brush, repaint it every few years, and apply a protective sealant to prevent corrosion.
The Center, ND homeowners’ guide to painting services
From average costs to expert advice, get all the answers you need to get your job done.
Painting a brick house is a permanent renovation project that requires weighing the pros and cons. Keep reading to find out if you should paint your brick home.
