"Kyle Dirk is a great choice. He is skilled, dependable, and honorable. Kyle replaced our sidewalk and driveway in 2015 and it has no cracks over the following ND winters. Kyle knows the value of thick concrete, quality gravel, proper scoring, and the best wire reinforcing. Jim Carter Bismarck, ND"
With over 15 years experience in the concrete industry, WJ Masonry LLC is your industry expert in Stark county. We pride ourselves on our extreme professionalism and attention to detail. Our customer satisfaction guarantee will assure you we will not leave your property until you are completely satisfied with our work. As a family owned and operated business you can trust that we will treat your home as we would treat our own. Give us a call today we look forward to working with you!
We're dedicated to providing our clients with the very best in concrete installation and repair for driveways, sidewalks, patios, steps and a variety of other projects. With over 15 years of industry experience, we take an enormous amount of pride in the attention to detail put into each of the projects we're involved with. We're known for our quality work and the integrity of our business. We look forward to building long-term relationships with our clients, and guarantee your satisfaction.
"Great company to work with! They were professional and hard working. They created a plan after careful inspection and carried it through to completion in a timely fashion. Will use again!"
"⭐⭐⭐⭐⭐ Had Draxen Construction out to take care of our roof in Bismarck, and they did an excellent job. The crew showed up ready to work, communicated throughout the project, and paid attention to the little details. Everything was done professionally, and they made sure the property was cleaned up before leaving. It’s hard to find contractors who take pride in their work, but Draxen definitely delivered. Highly recommend them for roofing work in the Bismarck area!"
We are a locally owned and operated company that values honesty, integrity and treats your home as if it were our own. We offer a variety of general contractor services that are customizable to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships and guarantee your satisfaction!
One of the most important factors to consider when buying a pressure washer is not just psi but also the machine’s overall cleaning power. This is based on both the psi and the GPM. Look for a cleaning rating, or effective cleaning unit (ECU), of up to 8,000 for most residential cleaning projects that require a pressure washer.
Maintaining a driveway depends on its material. For concrete and asphalt, it's best to clean the surface thoroughly twice a year with a stiff broom and a pressure washer to remove accumulated dirt and debris. Sealing the driveway is crucial to protect it from water damage and freeze-thaw cycles. Before applying a sealant, pressure wash the surface to remove any loose sealant, dirt, or stains, as sealing over them will trap them. Any cracks or expansion joints should be filled with a flexible polyurethane caulk or asphalt sealer. In colder climates, use sand instead of salt for de-icing. Sand helps melt snow and ice without accelerating the freeze-thaw process, which can cause cracks.
You should wait until your pavers have completely dried and cured before pressure washing them. Wait at least three to five days, though some sealants may need up to an entire week. Rushing that timeline can mess with the finish, weaken the seal, or leave streaks that are tough to fix. Once the sealant has fully set, stick to a gentle approach. Keep the pressure under 1,500 PSI and hold the nozzle at least two feet from the surface. Anything stronger or closer can blast the joint sand loose or wear down the sealant you just applied.
Some homeowners have luck using pressure washers, but this only works for old or weaker concrete sealants and with very powerful pressure washers. You’ll get better results by pressure washing water-based sealants. However, it’s worth trying on any sealant if you’re hoping for the least toxic, least expensive, and most DIY-friendly option. To try this method, rent or buy the most powerful pressure washer you can find and take several passes at the concrete, completely pressure washing the entire area. You may need to repeat the process multiple times to see results.
If your garage floor is heavily soiled or stained, then it’s a good idea to powerwash it with a concrete cleaner before sealing. This process will remove dirt and debris to help the new sealer bond to the concrete properly, and it will also improve the look of your sealed garage floor. After power washing your floor, make sure you let the concrete dry completely before applying sealant, usually for 24 to 48 hours.
The Hebron, ND homeowners’ guide to concrete driveway services
From average costs to expert advice, get all the answers you need to get your job done.
Between the endless customizations and decades of strength, the cost of a concrete driveway may be worth the investment. Let's break down your bottom line.
Before you hire a pro to pour a new concrete driveway, you should have a good idea of what you need. Discuss these concrete driveway installation questions with a pro.
Thinking about a new concrete driveway? Learn about installation costs, design options, and how to hire the right local pro for your home's exterior upgrade.
