Top-rated fencing pros.

Best fencing pros near Ackerman, MS

Enter your zip and get matched with up to 5 pros

Need a pro for your fencing service project in Ackerman, MS?

Select your specific project to find the pro for you.

Top-Rated Fencing pros in Ackerman - Updated Nov 2026

...
Showing 1-10 of 52
Fencing FAQs, answered by experts

On most untreated wood fences, there is no need to sand before treating. You typically only need to sand if there’s an old coat of paint or stain on your fence. If you do need to sand off a previous paint or protective coating (like an old stain or sealant), use medium-grit sandpaper.

You can't build a fence against your neighbor's fence if it touches or is attached to it unless you get explicit permission from your neighbor. Most municipalities recommend building a fence about two feet away from your neighbor's fence to allow access for fence repair and mowing.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again. 

The regulations for pool fence heights vary by state, so be sure to research what the legal, minimum height is in your area before purchasing or installing a fence. Though every region is different, generally a pool fence must be at least 4 and ½ feet high. If you’re unsure whether you need a fence around your pool, and how high that fence should be, contact a local pool enclosure expert to help you successfully, and safely, move forward.

A fence gate can sag for several reasons. The issue often stems from the hardware, such as damaged or bent hinges, or loose screws that can no longer support the gate's weight. The gate frame itself might also have come out of square due to failing supports. Alternatively, the problem may not be the gate but the supporting fence post, which could be leaning or out of place. In many cases, fixing a sagging gate is as simple as tightening the hinge screws or upgrading to more robust hinges.

The Ackerman, MS homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.