Get matched with top locksmiths in Ackerman, MS

When the temps drop, sometimes you need to thaw a lock to regain access. Options include warming the key with warm water, applying a de-icing spray, or using a hair dryer on low heat. Avoid using boiling water to prevent damage. To prevent future freezing, consider installing a cover or shield over the lock to keep water and ice out. Remember to be patient and gentle during thawing to avoid damaging the lock or key. If all else fails, consult a professional locksmith.

Several types of deadbolts are available, including single-cylinder, double-cylinder, rim, smart, and electronic deadbolt locks. The most common type found in U.S. homes is the single-cylinder deadbolt, which uses a key on the exterior and a thumb turn on the interior. A double-cylinder deadbolt features two locking mechanisms and requires a key to be operated from both the inside and the outside.

Yes, it’s possible a burglar can get through a deadbolt. Some types of deadbolts are harder for an intruder to get through, though. For example, a single-cylinder lock only requires breaking a window nearby and simply turning it. While other locks, such as a double-cylinder lock, may offer greater protection and make it harder for an intruder, no deadbolt is 100 percent effective.

There are many types of deadbolts, but these tips work on most. First, address any grime buildup. A bit of WD-40 will loose up rust and dirt so the deadbolt can turn. Inspect the door and frame alignment if this doesn't resolve the issue. Adjust the strike plate or the deadbolt's position to improve alignment. If the problem persists, disassemble the lock to inspect for damaged or worn parts. If you are unsure how to do it, hire a local locksmith.