Get matched with top fencing pros in Brooksville, MS

Fabricating an aluminum fence costs about $4,350 on average, ranging from about $2,450 to $6,500. Your fencing costs can run as low as $750 or as high as $11,000 or more, depending on the fence's size, complexity, and geographic location. You should consider additional cost factors including the thickness of the aluminum, height of the fence, necessary permits, and custom colors.

You can DIY a stockade fence installation, but prepare to put in some good sweat equity. For the best results, carefully plan the exact location of your fence before you break ground. In particular, carefully map out your post locations before setting them in concrete. Be sure to call your local utility company before digging to avoid damaging underground wiring and causing severe injury.

On the other hand, installing stockade fencing on your own might sound too overwhelming. It’s certainly time-consuming and labor-intensive. Besides the hard work, you must install it properly to avoid gaps. Unless you’re confident you can get the job done right, hiring a privacy fence installer near you is the way to go.

Because this composite fencing and deck material is made from both wood and plastic, it’s more durable than either alone. It’s so popular for outdoor purposes because it really does stand the test of time. Heavy rain and high heat won’t greatly change its structural integrity; it can last up to 25 years in total with proper care.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust.