Get matched with top drywall pros in Weldon Spring, MO

Q: Why use metal corners on drywall?

• <div><p>Metal corners, often referred to as corner beads for square corners, are used on drywall installations to provide structural reinforcement to vulnerable outside corners. Their usage safeguards against chipping, denting, or other forms of damage, enhancing the overall durability of the wall. Metal corners also offer a precise and straight edge that facilitates sharp and clean lines, crucial for achieving a polished and professional finish.</p></div>

Q: How do you know if a wall is load-bearing?

• <div><p>The easiest way to <a href="https://www.angi.com/articles/load-bearing-wall.htm">tell if a wall is load bearing</a> is to check if it&rsquo;s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don&rsquo;t fit into these categories can still be load-bearing. If you&rsquo;re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.</p></div>

Q: Why should drywall be staggered?

• <div><p>You should stagger drywall sheets to help prevent cracking. The joints between drywall sheets are the weak spots, so if you install drywall with seams aligned, you&rsquo;ll create weak lines that run across the length of the wall and extend from floor to ceiling. But when you stagger drywall, the solid sections of panels will support the joints. This can prevent seams from cracking or separating due to fluctuating temperature and humidity, vibrations from movement inside the home, and gravity. </p></div>

Q: What is the easiest way to remove texture from walls?

• <div><p>The easiest way to remove texture from walls is the soak-and-scrape method. You&rsquo;ll need to spray a section of the wall with water and let the water soak in and soften the texture. Then, you need to scrape the texture off using a drywall taping knife. This method works best with unpainted walls since paint prevents water from saturating the textured joint compound.</p></div>

Q: Can I use wall anchors on any type of wall?

• <div><p>Wall anchors are suitable for drywall and plaster walls, which are common in most homes. However, different wall materials may require specialized anchors. For concrete or masonry walls, you'd typically use concrete anchors. When dealing with other wall types, such as brick or tile, specific anchors designed for those materials may be necessary. Always consult with a hardware specialist or check the manufacturer's recommendations to ensure you select the appropriate anchors for your specific wall type.</p></div>

Enter your zip and get matched with up to 5 pros

Find Drywall pros in Weldon Spring

Vene Construction, LLC

4.7(

)

Drywall - Install - For Business

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2013

Free estimates

Warranties offered

"Elias did a fantastic job. His team went above and beyond. He installed drywall and I am very happy with the result. Elias and team are professional, neat, organized and quick to respond! Thank you!!!"

+81

Response time9 hrs

Recommended by100%of homeowners

Request Quote

Nations Drywall Repair

5.0(

284

)

Drywall - RepairDrywall - InstallDrywall - Install - For Business+1 more

Serving Weldon Spring, MO and surrounding areas

Approved

Super Service Award Winner

In business since 2007

Free estimates

Warranties offered

"Another great job by Nations Drywall. Highly recommend them."

Response time1 day

3 neighbors recently requested a quote

Recommended by96%of homeowners

Request Quote

Patrick Interior Finish, LLC

4.8(

)

Drywall - RepairDrywall - InstallDrywall - Install - For Business+1 more

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2008

Free estimates

Emergency services offered

"Patrick showed up when promised. He was nice and professional and he did a quality job. I would highly recommend his company to anyone needing drywall services."

+28

Response time1 day

Response rate91%

1 neighbors recently requested a quote

Request Quote

Team Drywall & Contracting

4.9(

)

Drywall - Install

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2006

Small jobs welcome

Offers commercial services

"They do very good work. Very fast also. Would hire again if I had anything left to drywall. Highly recommended"

Response time6 hrs

Response rate90%

2 neighbors recently requested a quote

Request Quote

PatchMaster Serving St Charles

5.0(

)

Drywall - RepairDrywall - InstallDrywall - Repair - For Business

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2021

Free estimates

Small jobs welcome

"Patchmaster provided great service. They repaired the hole in my wall quickly and matched my existing paint color perfectly. Would definitely use them again."

Response time2 days

9 neighbors recently requested a quote

Recommended by88%of homeowners

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2015

Free estimates

Small jobs welcome

"I had this company come install drywall in a garage addition. The team was friendly and prompt. They answered all of my questions and did an amazing job!"

Response time3 days

Response rate91%

Recommended by100%of homeowners

Request Quote

Carico Drywall & Insulation

4.6(

)

Drywall - InstallDrywall - RepairDrywall - Install - For Business+1 more

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Working with Carico Drywall & Construction was an easy experience from start to finish. He was punctual for the estimate he provided and the job itself. He was diligent and the work was of very high quality. He seemed knowledgeable about the trade and best of all, came in on budget for us. I would recommend Carico Drywall & Construction without hesitation."

+21

Response time2 days

Response rate85%

24 neighbors recently requested a quote

Request Quote

The Patch Boys of St. Louis

4.7(

)

Drywall - RepairDrywall - Repair - For Business

Serving Weldon Spring, MO and surrounding areas

Approved

In business since 2021

Free estimates

Small jobs welcome

"Great work and fair price. I’ll use them again!"

Response time20 mins

Response rate100%

Recommended by100%of homeowners

Request Quote

S and S Drywall Plaster Paint

5.0(

)

Drywall - InstallDrywall - Install - For BusinessDrywall - Repair+1 more

Serving Weldon Spring, MO and surrounding areas

Approved

Super Service Award Winner

In business since 2022

Free estimates

Emergency services offered

"Petey was super quick to respond to my post. He came out to do the estimate quickly and got the job done a few days later as requested. His price was super fair and he and his partner were absolutely fantastic and the job was done perfectly. I will definitely be calling on them again when it comes time to do all the plaster in the house."

Response time6 hrs

Response rate98%

3 neighbors recently requested a quote

Serving Weldon Spring, MO and surrounding areas

Approved

Super Service Award Winner

In business since 2000

Free estimates

Credit card accepted

"Zack and his team remodeled the majority of our new home purchase. They painted our kitchen cabinets, and walls in every room. They installed tile in our kitchen and bathrooms, as well as kitchen backsplash, and installed LVP flooring and gym flooring in our basement. They changed out most of the light fixtures and remodeled some of our basement rooms as well. The job was done on time and on budget. We could not have been happier with the work they performed or the input he provided. We would highly recommend Zack to anyone for future work."

+24

Response time11 hrs

Response rate88%

1 neighbors recently requested a quote

Request Quote

...

Showing 1-10 of 319

Drywall questions, answered by experts

Metal corners, often referred to as corner beads for square corners, are used on drywall installations to provide structural reinforcement to vulnerable outside corners. Their usage safeguards against chipping, denting, or other forms of damage, enhancing the overall durability of the wall. Metal corners also offer a precise and straight edge that facilitates sharp and clean lines, crucial for achieving a polished and professional finish.

The easiest way to tell if a wall is load bearing is to check if it’s an exterior wall or if it runs perpendicular to the joists above and below it (or parallel to beams). Exterior walls are almost always load-bearing, and walls that run under beams or parallel to them are also usually load-bearing. There are exceptions to these rules, and walls that don’t fit into these categories can still be load-bearing. If you’re unsure, hire a structural engineer to look at your home to assess whether or not the wall is structural.

You should stagger drywall sheets to help prevent cracking. The joints between drywall sheets are the weak spots, so if you install drywall with seams aligned, you’ll create weak lines that run across the length of the wall and extend from floor to ceiling. But when you stagger drywall, the solid sections of panels will support the joints. This can prevent seams from cracking or separating due to fluctuating temperature and humidity, vibrations from movement inside the home, and gravity.

The easiest way to remove texture from walls is the soak-and-scrape method. You’ll need to spray a section of the wall with water and let the water soak in and soften the texture. Then, you need to scrape the texture off using a drywall taping knife. This method works best with unpainted walls since paint prevents water from saturating the textured joint compound.

Wall anchors are suitable for drywall and plaster walls, which are common in most homes. However, different wall materials may require specialized anchors. For concrete or masonry walls, you'd typically use concrete anchors. When dealing with other wall types, such as brick or tile, specific anchors designed for those materials may be necessary. Always consult with a hardware specialist or check the manufacturer's recommendations to ensure you select the appropriate anchors for your specific wall type.

The Weldon Spring, MO homeowners’ guide to drywall services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Jul 2, 2026Jul 2, 2026
How Much Does Drywall Repair Cost in St. Louis, MO? [2026 Data]
Find out the average drywall repair cost in St. Louis, MO. Learn what you can expect to pay for local patching services and get your walls looking like new.
Scott Dylan Westerlund
•
Nov 18, 2025Nov 18, 2025
Drywall Installation Cost in St. Louis [2026 Data]
Installing drywall is the most common way to finish your home’s interior. Use this drywall installation cost guide to see what your project is likely to cost in St. Louis, MO.
Lyle Hendriks
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Texture Drywall? [2026 Data]
Drywall texture can create an attractive finish and add dimension to your home’s walls. This guide breaks down the factors that influence the cost to texture drywall.
Stacey L. Nash
•
Jul 20, 2026Jul 20, 2026
Plaster vs. Drywall: Pros, Cons, and Costs
Understanding the plaster vs. drywall debate is key to giving your home’s walls the perfect finish. Learn more about the pros, cons, and costs with our advice.
Lauren Bongard
•
Jul 15, 2026Jul 15, 2026
Sheetrock vs. Drywall: What’s the Difference?
The terms drywall and Sheetrock are often used interchangeably, but one is a brand and one is a specific product. Find out which one you need in this guide.
Paige Bennett
•
Jul 9, 2026Jul 9, 2026
Should Drywall Be Butt Up Against a Wall?
Thick gaps and extra joint compound can alter the look of drywall. So, should drywall be butt up against a wall? Review this guide for seamless installation.