Best fireplace pros near Bates City, MO

No, there are no ventless pellet stoves. Because pellet stoves burn wood pellets, they produce wood smoke—which contains carbon monoxide. This harmful substance needs to be vented out of your living area. That said, there are vent-free and ventless fireplaces that run on natural gas and propane. These offer the heating and ambiance of a fireplace without the need to vent thick and hazardous wood smoke.

Yes, you can put a freestanding one in a corner if you’re tight on space. Because pellet stoves don’t get as hot as other types of wood stoves, there only needs to be 3 inches of clearance from the wall on each side. Placing it in a corner should not impact the ventilation—you’ll still need to follow safety precautions by not installing too close to a window. Typically, it’s 4 feet from a window or 18 inches if the stove uses an external air source for combustion. Always check the owner’s manual for specific instructions.

Yes, removing a chimney is a difficult and major undertaking. Chimneys often provide structural support to a home, so if it's a load-bearing structure, you'll need to take extra precautions to maintain your home's integrity. A project of this complexity typically requires a structural engineer, a masonry contractor, and a demolition crew. The removal process may involve taking the chimney out brick by brick from inside the walls. The cost for chimney removal can range from $2,000 to $10,000, depending on the job's complexity. Due to the difficulty and cost, some homeowners opt to remove the fireplace and seal the chimney at the top and bottom, sometimes also removing the visible exterior portion at the roofline.

Chimney liners often benefit from insulation, though it is not always required. Insulation helps improve the liner's efficiency by keeping flue gasses hotter, which enhances draft and reduces creosote buildup. It also prevents condensation, which can lead to corrosion. Insulation is important for chimneys on exterior walls or in colder climates. Some building codes may require insulation, so checking local regulations is essential.