Get matched with top insulation pros in Thurmont, MD

Thurmont homeowners rate insulation pros in our network

3.9

(60 reviews)

Top-rated insulation pros.

Need a pro for your insulation service project in Thurmont, MD?

Select your specific project to find the pro for you.

Find Insulation pros in Thurmont

Avatar for Atlas Home Energy Solutions LLC
Atlas Home Energy Solutions LLC
4.9(
105
)

Serving Thurmont, MD and surrounding areas

Approved

In business since 2009

Free estimates

Warranties offered

"This probably the most professional service organization I've worked with in any capacity. They did a comprehensive audit and we discussed issues that could be remediated prioritized by the biggest bang for the buck and then they did the fixes we agreed upon. I always felt like I was dealing with an expert who had my best interests at heart - work that they could have done that they advised could be deferred. Ended up increasing the insulation in the attic which I'd known for years was a problem and sealing the ducts which has made a noticeable difference. I'd happily recommend Atlas to anyone who thinks they might benefit from a home energy audit and efficiency upgrades."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+16

Response time3 days
14 neighbors recently requested a quote
Recommended by97%of homeowners
Avatar for HomeGuard Foam & Foundation
HomeGuard Foam & Foundation
5.0(
9
)

Serving Thurmont, MD and surrounding areas

Approved

In business since 2020

Free estimates

Warranties offered

"The whole team was professional and the work was excellent! Definitely recommend this service for older homes that need help bringing down your monthly electric bill!"
Crawl space encapsulation
Inwood Encapsulation
Inwood Encapsulation
Inwood Encapsulation
Inwood Encapsulation

+74

Response time3 hrs
3 neighbors recently requested a quote
Recommended by44%of homeowners
Avatar for RetroFoam of Philadelphia
RetroFoam of Philadelphia
5.0(
22
)

Serving Thurmont, MD and surrounding areas

Approved (Corporate)

In business since 2023

Free estimates

Warranties offered

"We are extremely satisfied with the whole process of our house being insulated. First we had the walls done, and then a couple weeks later we had our attic insulated. The crew were so nice, friendly, and knowledgeable. We are very satisfied with everything. Thank you, everyone."
RetroFoam Wall Insulation
Installing RetroFoam
RetroFoam with Siding
RetroFoam with Brick
Response time1 day
132 neighbors recently requested a quote
Recommended by75%of homeowners
Avatar for Tri-State Builders
Tri-State Builders
4.6(
104
)

Serving Thurmont, MD and surrounding areas

Approved

In business since 2000

Free estimates

Emergency services offered

"On time, courteous, clean and efficient. Foamed and drywalled the garage efficiently, and cleaned up well after the job. Provided advise on issues seen during insulation preparation. Great service."
 Kitchen
Barber Addition
Rowland Addition
Custom Home
Traska Addition

+36

Response time4 days
12 neighbors recently requested a quote
Recommended by100%of homeowners
Avatar for Atlas Home Energy Solutions
Atlas Home Energy Solutions
4.1(
34
)

Serving Thurmont, MD and surrounding areas

Approved

In business since 2009

Free estimates

Credit card accepted

"Our first interaction with Atlas was with Shannon. As knowledgeable and personable as one could hope for. She clearly explained cost effective measures to better insulate our house. We opted for sealing and insulating our attic and weather stripping a number of doors. We were very pleased with the workmanship and the energy savings they produced. They also helped us get a PEPCO credit which reduced the overall cost of the job. A winner!"
Visual Inspection of all Areas of your Home
Attic Insulation and Air Sealing
Infrared Camera Inspection
Attic Spray Foam
Blower Door Whole House Air Leakage Test

+11

Response time1 day
Recommended by87%of homeowners
Avatar for Handy Development llc
Handy Development llc
4.9(
9
)

Serving Thurmont, MD and surrounding areas

In business since 2019

Free estimates

Credit card accepted

"The team arrived slightly early to be well prepared to start the job on time. As they began they laid down protective barriers to keep the home clean. While in the attic they blew in the insulation with an even consistent barrier, ensuring that all locations with infrastructure were well covered. As they wrapped up the job, they cleaned behind them as they closed up the attic, removed the floor coverings and were on their way. The only way I can tell they were here is that the heat runs less in the winter and the air conditioning runs less in the summer. I would recommend this process and this team to anyone who owns a home and has not insulated their attic."
Fairfax va Install
Martinsburg wv ( Attic barrier
Martinsburg solar fan installed
Winchester Va radiant install
Salem Virginia install

+45

Recommended by100%of homeowners
Showing 1-10 of 33
Insulation questions, answered by experts

Fiberglass is the best insulation for HVAC ducting because it's inexpensive, widely available, versatile, and long-lasting. Fiberglass also offers acoustic insulation in addition to thermal insulation, which can contribute to a more peaceful home environment. You can use other materials like mineral wool, but fiberglass is the industry standard.

Yes, basement insulation needs a vapor barrier due to its susceptibility to moisture seeping in from the outside of the house. You should install a moisture barrier before you install insulation or purchase insulation that comes prebuilt with a moisture barrier to avoid water damage in your insulation and costly mold and water remediation expenses. 

Polyisocyanurate foam, or polyiso for short, has the highest R-value per square inch: 6.5 to 6.8. Polyiso is a rigid foam that comes with a reflective foil on both sides to serve as a radiant barrier. Given its high R-value, rigid foam is usually meant for foundations and basement walls.

The average U.S. homeowner pays $1,850 to insulate their home. However, the cost of insulation depends on the type, the size of your home, and who does the installation work. 

The cost of foam board insulation depends on whether it's made from expanded polystyrene (EPS) or extruded polystyrene (XPS). EPS has the lower price point, usually costing between $0.25 and $0.50 per board foot, while XPS costs between $0.40 and $0.50 per board foot.

Unfaced wall insulation is easier to cut and install, making it the better choice for a DIY project. It’s also more affordable. But if it’s unfaced, you’ll likely need to add a vapor barrier to reach your desired R-value and efficiency, as it doesn’t offer any moisture barrier.

Faced insulation uses paper or foil to create a built-in barrier and doesn’t require an extra step. It’s also more fire-resistant and safe. But it’s quite a bit more expensive and a little bit harder to work with as a DIYer.

The Thurmont, MD homeowners’ guide to insulation services

From average costs to expert advice, get all the answers you need to get your job done.