Get matched with top locksmiths in Lake Shore, MD

Yes. Most deadbolts purchased from a home improvement store include a step-by-step installation template that is easy to follow, even for novice DIYers. One of the most important steps for successful deadbolt installation is having the proper tools to start with and carefully measuring prior to any attempts at installation.

Rekeying your own locks is a low-cost task that prevents you from having to replace the locks themselves completely. The first couple of times you rekey a lock may be challenging because this is an intermediate DIY task. You can purchase a rekey kit from most hardware stores, but make sure you’re buying the kit from the brand of lock in your home that you’re going to rekey. 

Lock bumping is a technique locksmiths use to quickly and quietly open a pin tumbler lock, typically found in most types of deadbolts. It involves inserting a specially crafted key, or bump key, into the lock and tapping or "bumping" it with a mallet or similar tool. The force applied causes the lock's pins to jump momentarily, allowing the lock to be turned and opened. Unfortunately, thieves also use this technique to break into homes. Luckily, products like a deadbolt strap will fortify your lock.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.