Get matched with top sump pump installation pros in Lynn, MA

"My house had no water coming out of our faucets so I did some research and found Clear water and pump well service I called spoke to a nice ladyon the phone she made a appointment for the next day ,when the came and they told me it was the well water pump needed to replaced so they fixed it plus they also said needed to replace the well tank in the house and they fixed that too,. I highly recommend Clear Water and Pump &Well."

"Petros and his assistant got to my house quickly, diagnosed the problem and gave me some options. They fixed the problem quickly and went the extra mile to install a new cleanout in my basement so it would be easier to snake the drain in the future. Petros took the time to explain what he had done and why. He was very friendly, easy to deal with and he charged me a fair price. I will definitely be calling Floros Plumbing from now on!"

"

If you want the best in the business to provide you with expertise, professionalism, and value when it comes to basement waterproofing, you only need to call one company - Pioneer Basement.

No - this is not a paid endorsement - Timothy Xavier just left my house after installing a replacement sump pump. He is extremely knowledgeable, efficient, and meticulous.

I have been dealing with Pioneer Basements for 10 years now and continue to be impressed with their honesty and solutions.

Don't waste your time or money going anywhere else - these guys are the best!

"

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"From receiving the quote to the installation and servicing NETR has been extremely professional and great to work with on this renovation project. The installation went very smoothly and every person on their team had a lot of experience. Further, the team was able to solve a number of tricky problems with our installation (such as running the electrical behind the walls, drilling a hole through the roof for the pipe, concealing the pump in the back of the closet). The installation happened on time and on schedule. I would highly recommend them to anyone looking for HVAC services at home."

"This was an emergency service call. Main water supply pipe from street to our house had failed. They responded to call within 45 minutes, evaluated issue, gave us price, Within another half hour equipment showed up. Staff was friendly professional and efficient. Start to finish from initial phone call to replaced main with running water re-established was just over 4 hours. Really impressive company with great customer service. Thank you!"

"Pete did an excellent job on our annual clean and check up for our mini-split ductless system."

"Jeff M. was the technician for the annual service for my two sump pumps in the the basement. He was very nice and completed the job in a timely fashion. The product itself that we have of a french drain system and 2 sump pump works and we have not had any water in the basement since getting it installed. I would recommend Busy Dogs product to anyone."

"installed new single zone mini-spit system"

"Addario's Services did a great job installing a new high efficiency combo boiler in our home. After I requested an estimate, I got a quick call from the office to schedule a time for one of their comfort advisors to come out to our home. Sam, my comfort advisor was very knowledgeable, and I appreciated his low pressure presentation. Once the work was booked, because our installation was complex, Joe came out and came up with a plan to vent the exhaust on the side of my house to minimize the number of pipes on the front of my house. The installation went very well, and they installed a temporary water heater so we were only without hot water for less than a day. For the day we were without heat, they brought in plenty of space heaters to make us comfortable for that night. When the installation was complete, the installation technicians took lots of time to explain the operation of the new system, and to answer any questions I had. The system is working great and there have b"