Get matched with top electricians in New Salisbury, IN

Unless you’re a licensed electrician, you should not DIY any electrical work in your home. Working with wires and electricity is potentially dangerous to both you and the structure you’re working on, and it could lead to house fires or electric shock if you’re not 100% sure what you’re doing. There’s a big difference between changing a light switch cover and rewiring an entire home. If you’re staring down a potentially difficult electrical job, give a pro a call.

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

A ceiling light will usually have two or three wires: black, white, and sometimes green. Black wires are positive, or hot, while white wires are negative, or neutral. The green wire is the grounding wire. 

When you’re wiring the light, connect black to black, white to white, and green to the grounding screw.

Updating your old outlets, or adding grounding clamps to a metal box are two methods. Each home is different. Consult an electrician for advice on grounding a wire without doing extensive work to dig into the ground.