Get matched with top dishwasher installation pros in Eagle, ID

To create a siphon break and remove any chance of dirty sink water or water that backs up into the sink from getting into your dishwasher, your dishwasher drain hose needs to have a high loop or an air gap device as part of its installation. All building codes require at least a high loop. In many places, it’s necessary to install an air gap device to meet the code.

Your first instinct might be to grab the bleach to clean a moldy dishwasher, but it’s not the best product for the job. You don’t want to use bleach to clean stainless steel components if your dishwasher has them, as it can cause significant damage. In addition, the scent of bleach can linger if not rinsed well, causing your dishes to retain a smell (and even taste) of bleach.

If the dishwasher is in working condition, start and run a complete cycle with nothing inside. Let it drain and sit overnight before removing the hoses. In theory, it should effectively drain. You may find residual water in the hoses, but you can plug them. If the dishwasher breaks down midcycle it can sometimes be full of water. You’ll need to manually remove the water with a plastic cup before removing the dishwasher.

Installing a dishwasher should take one to four hours, depending on the complexity of the installation and whether you DIY or hire a pro. Even if you're particularly handy, installing a dishwasher on your own will likely take longer — at least two hours. On the other hand, a professional can likely install a dishwasher in about an hour. Installation time will take longer if you have to remove an existing dishwasher, reroute plumbing, or repair damaged flooring underneath the appliance.