Get matched with top locksmiths in Lake Worth, FL

Rekeying is typically cheaper than replacing locks. Professional rekeying costs between $40 and $160, sometimes with an additional fee of $15 to $40 per lock. A locksmith's hourly rate averages around $75. If you do it yourself, a rekeying kit can cost as little as $10. In contrast, replacing a lock costs between $130 and $500, with an average of around $315, depending on the hardware and lock type. Rekeying is a simpler process that changes the key for your existing lock without replacing the hardware. It is a good option if you have a quality lock that works well, you've recently moved, you've lost a key, or you need a quick security upgrade. The best choice depends on the condition of your current locks.

If your key breaks in a lock, first remain calm and avoid forcing the broken piece further in. You may be able to remove it yourself if a portion of the key is still protruding from the lock. To aid removal, lubricate the keyhole with a graphite-based spray. Then, try using tools like pliers, tweezers, a bobby pin, or even a jigsaw blade to gently grasp and pull the broken piece out. If these methods don't work, you can't reach the key, or you're concerned about damaging the lock, it's best to call a professional locksmith for assistance.

Over time, latch components may wear out or get grimy, leading to this problem. First, check for dirt, dust, or debris in the latch mechanism to ensure smooth operation. Use an aerosol duster and lubricant to clean and loosen. You may also need to tighten the screws in the component, adjust the strike plate, or replace the lock. If none of these steps resolve the problem, consult a professional locksmith.

Begin by checking the power source, typically a battery or wired connection. Ensure the battery is installed correctly, has sufficient charge, and isn't corroded. If it's a wired lock, examine the electrical connections to confirm they are secure and free from damage. Additionally, inspect the lock's programming or settings. Confirm that user codes or access credentials are programmed correctly and that any remote control devices are paired and functional.